Design of the Sns Accumulator Ring Vacuum Systems*
نویسنده
چکیده
Brookhaven is undertaking the design, construction and commissioning of the accumulator ring and the beam transport lines for the 1-GeV Spallation Neutron Source. The operating pressure of the accumulator ring vacuum system will be 10 Torr and is needed to minimize the beam-residual gas ionization. The vacuum requirement, the layout of the ring vacuum system, and the design of the vacuum chambers, vacuum pumps and other hardware are presented here.
منابع مشابه
Application of Ual to High-intensity Beam Dynamics Studies in the Sns Accumulator Ring*
The SNS Ring off-line parallel simulation environment based on the Unified Accelerator Libraries (UAL) has been implemented and used for extensive full-scale beam dynamics studies arising in high-intensity rings. The paper describes the structure of this environment and its application to the development and analysis of the SNS accumulator ring beam loss model including a complex combination of...
متن کاملMechanism of Electron Cloud Clearing with Electrodes
Clearing electrodes have been successfully used to remove the ion from the vacuum chamber in many electron accelerators, especially in electron synchrotron light source. Electron cloud caused beam instabilities and vacuum pressure rise are becoming more and more important with the increasing beam intensity in recent years. In this paper we have explored the mechanism to clear the electron cloud...
متن کاملElectron-cloud Mitigation in the Spallation Neutron Source Ring∗
The Spallation Neutron Source (SNS) accumulator ring is designed to accumulate, via H− injection, protons of 2 MW beam power at 1 GeV kinetic energy at a repetition rate of 60 Hz [1]. At such beam intensity, electroncloud is expected to be one of the intensity-limiting mechanisms that complicate ring operations. This paper summarizes mitigation strategy adopted in the design, both in suppressin...
متن کاملExpected Beam Performance of the Sns Linac*
The Spallation Neutron Source (SNS) project is a collaboration among Argonne, Brookhaven, Jefferson, Lawrence Berkeley, Los Alamos and Oak Ridge National Laboratories. The Linac, which injects beam into an accumulator ring, is comprised of both normal and superconducting rf (SRF) accelerating structures. Two room-temperature rf structures, a 402.5-MHz drift-tube linac (DTL) and an 805-MHz coupl...
متن کاملPreliminary Change Request for the Chromatic Sextupoles and Trim Quadrupole Elements of the SNS Accumulator Ring
In view of the adopted modi ed design for the 1.3 GeV compatible accumulator ring of the SNS [1], complementary studies have been undertaken, in order to justify the need of higheld chromatic sextupoles for chromaticity correction. Furthermore, as these chromatic sextupoles introduce a rst order quadrupole \feed-down" e ect, the trim quadrupole elements speci cations had to be reviewed in order...
متن کامل