Polarization beam splitter based on a photonic crystal heterostructure.

نویسندگان

  • E Schonbrun
  • Q Wu
  • W Park
  • T Yamashita
  • C J Summers
چکیده

The design and characterization of a photonic crystal (PC) polarization beam splitter (PBS) that operates with an extinction ratio of greater than 15 dB for both polarizations are presented. The PBS is fabricated on a silicon-on-insulator (SOI) wafer where the input and output ports consist of 5 mum wide ridge waveguides. A large spectral shift is observed in the dispersion plots of the lowest-order even (TE-like) and odd (TM-like) modes due to the SOI confinement. Because of this shift, the TE-like mode is close to a directional gap at the top of the band, and the TM-like mode is in a low-frequency regime where the dispersion surface is almost isotropic. We show that the TE-like mode has very high reflection at the interface between the two PCs, whereas the TM-like mode exhibits a very high transmission.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Design of Photonic Crystal Polarization Splitter on InP Substrate

In this article, we suggested a novel design of polarization splitter based on coupler waveguide on InP substrate at 1.55mm wavelength. Photonic crystal structure is consisted of two dimensional (2D) air holes embedded in InP/InGaAsP material with an effective refractive index of 3.2634 which is arranged in a hexagonal lattice. The photonic band gap (PBG) of this structure is determined using t...

متن کامل

Polarization Beam Splitter Based on Self-Collimation of a Hybrid Photonic Crystal

A photonic crystal polarization beam splitter based on photonic band gap and self-collimation effects is designed for optical communication wavelengths. The photonic crystal structure consists of a polarization-insensitive self-collimation region and a splitting region. TMand TE-polarized waves propagate without diffraction in the self-collimation region, whereas they split by 90 degrees in the...

متن کامل

Analysis of guided-resonance-based polarization beam splitting in photonic crystal slabs.

We present an analysis of the phase and amplitude responses of guided resonances in a photonic crystal slab. Through this analysis, we obtain the general rules and conditions under which a photonic crystal slab can be employed as a general elliptical polarization beam splitter, separating an incoming beam equally into its two orthogonal constituents, so that half the power is reflected in one p...

متن کامل

Photonic Crystal Polarization Beam Splitter in Silicon-On-Insulator Platform

In this work we report an ultracompact (8.7 μm x 10.6 μm) integrated planar photonic crystal polarization beam splitter in silicon-on-insulator platform with 18.6 dB and 11.1 dB extinction ratio at a wavelength of 1520 nm at the outputs for transverse-magnetic and transverse-electric polarization, respectively. The physical separation of both polarization states is achieved by negative and posi...

متن کامل

Polarizing beam-splitter based on defective photonic crystals

The performance of a polarizing beam splitter based on the one-dimensional photonic crystals (1D-PCs), is theoretically investigated. The polarizing beam splitter consists of a symmetric stack of the low-index quarter-wave plates and the high-index half-wave plates with a central defect layer of air. The linear transmission properties of the polarizing beam splitter are numerically simulat...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 31 21  شماره 

صفحات  -

تاریخ انتشار 2006