Blister formation during graphite surface oxidation by Hummers’ method
نویسندگان
چکیده
Graphite oxide has a complex structure that can be modified in many ways to obtain materials for a wide range of applications. It is known that the graphite precursor has an important role in the synthesis of graphite oxide. In the present study, the basal-plane surface of highly annealed pyrolythic graphite (HAPG) was oxidized by Hummers' method and investigated by Raman spectroscopy and atomic force microscopy. HAPG was used as a graphite precursor because its surface after cleavage contains well-ordered millimeter-sized regions. The treatment resulted in graphite intercalation by sulfuric acid and blister formation all over the surface. Surprisingly, the destruction of the sp2-lattice was not detected in the ordered regions. We suggest that the reagent diffusion under the basal plane surface occurred through the cleavage steps and dislocations with the Burgers vector parallel to the c-axis in graphite.
منابع مشابه
Synthesis of Graphite Oxide with Different Surface Oxygen Contents Assisted Microwave Radiation
Graphite oxide is synthesized via oxidation reaction using oxidant compounds that have lattice defects by the incorporation of unlike functional groups. Herein, we report the synthesis of the graphite oxide with diverse surface oxygen content through three (B, C, D) different modified versions of the Hummers method assisted microwave radiation compared with the conventional graphite oxide sampl...
متن کاملEvaluating the Effect of Graphite Source and Operating Conditions on the Synthesis of Graphene Oxide
In this research graphene oxide was synthesized by two methods. These methods were achieved by changing the improved Hummers’ and modified Hummers’ methods. Structure of graphene oxide was characterized by scanning electron microscopy (SEM) images, X-ray diffraction (XRD) patterns, Raman spectroscopy and Fourier transform infrared (FTIR) spectra. According to SEM image, the thickness of graphen...
متن کاملGraphene materials with different structures prepared from the same graphite by the Hummers and Brodie methods
Graphene materials containing different functional groups were prepared from a natural graphite, by means of two different oxidation methods (Hummers and Brodie). It was observed that the differences in the structure of the resultant graphite oxides (GOs) greatly affect the structure of the graphenes resulting from their thermal exfoliation/reduction. Although the oxidation of the graphite was ...
متن کاملGraphene oxide: the mechanisms of oxidation and exfoliation
Graphene oxides (GOs) with large sheets and more perfect aromatic structure were prepared by a novel modified Hummers method. We demonstrated that the graphite did not need to be oxidized to such a deep degree as described in Hummers method because the space distance increased little when the oxidation proceeded to a certain extent and the obtained graphite oxides (GTOs) could be fully exfoliat...
متن کاملControllable functionalization and wettability transition of graphene-based films by an atomic oxygen strategy
Though chemical modification of graphene based on Hummers method has been most widely used to tailor its properties and interfacial characteristics, a method which could achieve definitive and controllable groups and properties is still highly required. Here, we demonstrate a high-vacuum oxidation strategy by atomic oxygen (AO) and investigate the AO induced functionalization and wettability tr...
متن کامل