Frictional Characteristics of a Small Aerostatic Linear Bearing
نویسندگان
چکیده
Frictional characteristics of a small aerostatic linear bearing are accurately evaluated by means of a method, in which the force acting on the moving part of the bearing is measured as the inertial force. An optical interferometer is newly developed to measure the Doppler shift frequency of the laser light reflected on the small moving part. From the measured time-varying Doppler shift frequency, the velocity, the position, the acceleration and the inertial force of the moving part are numerically calculated. It is confirmed that the dynamic frictional force acting inside the bearing is almost proportional to the velocity of the moving part and is similar to the theoretical value calculated under the assumption that the flow inside the bearing is the Couette flow.
منابع مشابه
Method of generating and measuring static small force using down-slope component of gravity.
A method of generating and measuring static small forces at the micro-Newton level is proposed. In the method, the down-slope component of gravity acting on a mass on an inclined plane is used as a static force. To realize a linear motion of the mass with a small friction, an aerostatic linear bearing is used. The forces acting on the mass, such as the down-slope component of gravity and the dy...
متن کاملNumerical Study on the Static Characteristics of Novel Aerostatic Thrust Bearings Possessing Elastomer Capillary Restrictor and Bearing Surface
In this paper a novel design of aerostatic thrust bearing is proposed and is analyzed numerically. The capillary restrictor and bearing disk are made of elastomer like silicone and PU. The viscoelasticity of elastomer helps the capillary expand for more air flux and at the same time, allows conicity of the bearing surface to form when the air pressure is enhanced. Therefore the bearing has the ...
متن کاملHigh capacity aerodynamic air bearing (HCAB) for laser scanning applications
A high capacity aerodynamic air bearing (HCAB) has been developed for the laser scanning market. The need for increasing accuracies in the prepress and print plate-making market is causing a shift from ball bearing to air bearing scanners. Aerostatic air bearings are a good option to meet this demand for better performance however, these bearings tend to be expensive and require an additional a...
متن کاملA Study on Characteristics and Geometric Parameters of the Flat Porous Aerostatic Bearing
A CFD software was employed to analyze the characteristics of the flat round porous aerostatic bearings. The effects of gap between the bearing and the guide way and the porosity of the porous material on the load capacity of the bearing were studied. The adequacy of the simulation model and the approach was verified. From the parametric study, it is found that the depth of the flow path does n...
متن کاملDynamic Calibration Methods for Force Transducers
Three Methods for evaluating the dynamic response of force transducers against varying force are described in this paper. In all methods, the inertial force of a mass is used as the known dynamic force, and this reference force is applied to a force transducer under test. The inertial force is measured highly accurately as the product of the mass and the acceleration. An aerostatic linear beari...
متن کامل