Lab-on-a-chip device for fabrication of therapeutic microbubbles on demand.
نویسندگان
چکیده
Electron beam lithography (EBL) was used to fabricate microchannels to produce microbubbles with highly homogeneous size distributions. Using the EBL technique, microchannels can be prototyped at a fast and cost effective rate allowing for evaluation of various microbubble shell materials.
منابع مشابه
Design and fabrication of an effective micromixer through passive method
Micromixer is a significant component of microfluidics particularly in lab-on-chip applications so that there has been a growing need for design and fabrication of micromixers with a shorter length and higher efficiency. Despite most of the passive micromixers that suffer from long mixing path and complicated geometry to increase the efficiency, our novel design suggests a highly efficient micr...
متن کاملSelf-concentrating buoyant glass microbubbles for high sensitivity immunoassays.
Here, we report the novel application of a material with self-concentrating properties for enhancing the sensitivity of immunoassays. Termed as glass microbubbles, they are antibody functionalized buoyant hollow glass microspheres that simultaneously float and concentrate into a dense monolayer when dispensed in a liquid droplet. This self-concentrating charactaristic of the microbubbles allow ...
متن کاملControllable gas/liquid/liquid double emulsions in a dual-coaxial microfluidic device.
This article presents a simple and novel approach to prepare monodispersed gas-in-oil-in-water (G/O/W) and gas-in-water-in-oil (G/W/O) double-emulsions in the same dual-coaxial microfluidic device. The effects of three phase flow rates on the sizes of microbubbles and droplets and the number of the encapsulated microbubbles were systematically studied. We successfully synthesized two different ...
متن کاملSoft lithography: masters on demand.
We report an ultra-rapid prototyping technique for forming microchannel networks for lab-on-a-chip applications, called masters on-demand. Channels are produced by replica molding on masters formed by laser printing on flexible copper printed circuit board (PCB) substrates. Masters of various designs and dimensions can be individually or mass produced in less than 10 minutes. Using this techniq...
متن کاملBiologically Inspired Adaptive Address-Event Representation Imager for Particle Localization
This paper describes a biologically inspired imager designed for particle localization in a lab-on-chip system. Lab-on-chip systems demand efficient sensing and communication. The imager serves as the frontend of the system and collects optical information from particles nearby the imager surface without any intervening optics. The imager uses address-event representation (AER), inspired from t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Biomedizinische Technik. Biomedical engineering
دوره شماره
صفحات -
تاریخ انتشار 2013