Characterization of Corning EPMA Standard Glasses 95IRV, 95IRW, and 95IRX

نویسندگان

  • Paul Carpenter
  • Dale Counce
  • Emily Kluk
  • Carol Nabelek
چکیده

The preparation, synthesis, and characterization of Corning trace-element glasses 95IRV, 95IRW, and 95IRX by bulk chemical and electron microprobe techniques is discussed. Working values for the doped elements in the 95-series glasses are established. Blank values have been determined by both bulk chemical and electron microprobe analysis, and important x-ray interferences are highlighted. Chemical homogeneity both within a rod cross-section, and along cane length has been documented. These glasses are standard reference materials intended for use as both primary and secondary electron microprobe standards.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Microbeam Characterization of Corning Archeological Reference Glasses: New Additions to the Smithsonian Microbeam Standard Collection

An initial study of the minor element, trace element, and impurities in Corning archeological references glasses have been performed using three microbeam techniques: electron probe microanalysis (EPMA), laser ablation ICP-mass spectrometry (LA ICP-MS), and secondary ion mass spectrometry (SIMS). The EPMA results suggest a significant level of heterogeneity for a number of metals. Conversely, h...

متن کامل

COMPARISON OF DIFFERENT GLASS COMPOUNDS FOR INTRINSIC FIBER OPTIC TEMPERATURE SENSORS

Different glasses suitable for temperature sensing in the fiber optic sensors were studied in this article. The phase changes for eight different glass materials were calculated and results were compared. Our results showed that extra dense flint glass is the most sensitive one, while pure silica results in the lowest phase change. In another study the effect of wavelength on the phase variatio...

متن کامل

Evaluation of Pyrex Glasses by the Line-Focus-Beam Ultrasonic Material Characterization System

The line-focus-beam ultrasonic material characterization (LFB-UMC) system is applied to evaluation of commercial Pyrex glasses (C-7740, Corning Inc.). Twenty-eight specimens were prepared at random from different lots. Velocities of leaky surface acoustic waves (LSAWs), VLSAW, were measured at 225 MHz around 23°C. VLSAW was 3121.85-3149.83 m/s. To understand the velocity variations, bulk acoust...

متن کامل

Critical assessment of the elemental composition of Corning archeological reference glasses by LA-ICP-MS

Corning archeological reference glasses A, B, C, and D have been made to simulate different historic technologies of glass production and are used as standards in historic glass investigations. In this work, nanoseconds (193, 266 nm) and femtosecond (800 nm) laser ablation were used to study the elemental composition of Corning glasses using laser ablation inductively coupled plasma mass spectr...

متن کامل

Optical characterization of BK7 borosilicate glasses containing different amounts of CeO2

Borosilicate BK7 glasses doped with different amounts of CeO2 (0.5,1,1.5%) were prepared by the convenient melting process in this work. DTA analysis proved that 0.5-1% CeO2 has a network modifier role and then up to 1.5% it shows network former role.For structural studies, FT-IR and Raman spectroscopy were carried out. Fermi energy level, direct/ indirect optical band gap and Urbach energy wer...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 107  شماره 

صفحات  -

تاریخ انتشار 2002