Highly Sulfonated Diamine Synthesized Polyimides and Protic Ionic Liquid Composite Membranes Improve PEM Conductivity
نویسندگان
چکیده
A novel sulfonated diamine was synthesized from 1,4-bis(4-aminophenoxy) benzene [pBAB]. Sulfonated polyimides (SPIs) were synthesized from sulfonated pBAB, 1,4-bis(4-aminophenoxy-2-sulfonic acid) benzenesulfonic acid [pBABTS], various diamines and aromatic dianhydrides. Composite proton exchange membranes (PEMs) made of novel SPIs and a protic ionic liquid (PIL) 1-vinyl-3-H-imidazolium trifluoromethanesulfonate [VIm][OTf] showed substantially increased conductivity. We prepared an SPI/PIL composite PEM using pBABTS, 4,4′-(9-fluorenylidene) dianiline (9FDA) as diamine, 3,3′,4,4′-diphenylsulfone tetracarboxylic dianhydride (DSDA) as dianhydride and 40 wt % [VIm][OTf] with a high conductivity of 16 mS/cm at 120 °C and anhydrous condition. pBABTS offered better conductivity, since the chemical structure had more sulfonated groups that provide increased conductivity. The new composite membrane could be a promising anhydrous or low-humidity PEM for intermediate or high-temperature fuel cells. OPEN ACCESS Polymers 2015, 7 1047
منابع مشابه
Improving the Conductivity of Sulfonated Polyimides as Proton Exchange Membranes by Doping of a Protic Ionic Liquid
Proton exchange membranes (PEMs) are a key component of a proton exchange membrane fuel cell. Sulfonated polyimides (SPIs) were doped by protic ionic liquid (PIL) to prepare composite PEMs with substantially improved conductivity. SPIs were synthesized from diamine, 2,2-bis[4-(4-amino-phenoxy)phenyl]propane (BAPP), sulfonated diamine, 4,4'-diamino diphenyl ether-2,2'-disulfonic acid (ODADS) and...
متن کاملSynthesis of Sulfonated Polystyrene/acrylate–ionic Liquid (Si-SPS/A–IL) Hybrid Membranes for Methanol Fuel Cells
In this paper, the silicon-containing sulfonated polystyrene/acrylate–ionic liquid (Si-SPS/A–IL)hybrid membranes was prepared to obtain the proton exchange membrane (PEM) materials withhigh methanol barrier and good selectivity. The Si-SPS/A–IL hybrid membranes characterized asthe function of IL to evaluate their potential as PEMs in direct methanol fuel cells (DMFCs).Fourdifferent Hybrid mater...
متن کاملPreparation and Physical Characterization of Sulfonated Poly (Ether Ether Ketone) and Polypyrrole Composite Membrane
Sulfoanted poly(ether ether ketone) membranes were prepared by the sulfonating agent sulfuric acid. These membranes were modifed by incorporating conducting polymer polypyrrole in order to increase the ionic conductivity and reduce the methanol transmission rate. The modifed composite membranes were then compared on the basis of ionic conductivity, methanol transmission...
متن کاملInstitutional Repository Sulfonated poly ( 2 , 5 - benzimidazole ) ( ABPBI ) / MMT / ionic liquids composite membranes for high temperature PEM applications
The effect of nanoclay cloisite Na + on the mechanical and conductive properties of ionic liquids (ILs) doped sulfonated ABPBI (SABPBI) composite membranes for high temperature proton electrolyte membrane (PEM) applications were investigated in this report. The composite SABPBI membranes with well-dispersed cloisite Na + showed great improvement in mechanical properties with the increase of ove...
متن کاملPhosphorus-Containing Sulfonated Polyimides for Proton Exchange Membranes
Synthesis and characterization of the novel sulfonated BAPPO monomer and its use in the synthesis of a new phosphine oxide-based sulfonated polyimide are described. BTDA, 6FDA, and DDS were used as monomers in the polyimide synthesis. Sulfonated polyimide membranes were obtained by a solution thermal imidization method. The thermal behavior of the polymers was investigated by DSC and TGA. The m...
متن کامل