Title : Comparison of UV / PDS and UV / H 2 O 2 processes for the degradation of atenolol in water

UV/H2O2 and UV/peroxodisulfate (PDS) processes were adopted to degrade a typical β-blocker, atenolol (ATL), and the degradation efficiencies under various operational parameters (oxidant dosage, pH, HCO3, humic acid (HA), NO3, and Cl) were compared. Principal factor analysis was also performed with a statistical method for the two processes. It was found that increasing the specific dosage of the two peroxides ([peroxide]0/[ATL]0) ranging from 1:1--8:1 led to a faster degradation rate but also higher peroxide residual. Within the pH range 3--11, the optimum pH was 7 for the UV/PDS process and elevating pH benefitted the UV/H2O2 process. The presence of HCO3, HA, and Cl adversely affected ATL oxidation in both processes. The NO3 concentration 1--3 mol/L accelerated the destruction of ATL by the UV/PDS process, but further increase of NO3 concentration retarded the degradation process, contrary to the case in the UV/H2O2 process. The rank orders of effects caused by the six operational parameters were pH ≈ specific dosage > [HA]0 > [NO3]0 > [HCO3]0 >[Cl]0 for the UV/H2O2 process and specific dosage > pH > [HA]0 > [NO3]0 > [HCO3]0 >[Cl]0 for the UV/PDS process. In general, the UV/PDS process was more sensitive to changes in operational parameters than the UV/H2O2 process, but generally more efficient in ATL removal under the same conditions.