Single Piezo-Actuator Rotary-Hammering (SPaRH) Drill
نویسندگان
چکیده
The search for present or past life in the Universe is one of the most important objectives of NASA’s exploration missions. Drills for subsurface sampling of rocks, ice and permafrost are an essential tool for astrobiology studies on other planets. Increasingly, it is recognized that drilling via a combination of rotation and hammering offers an efficient and effective rapid penetration mechanism. The rotation provides an intrinsic method for removal of cuttings from the borehole while the impact and shear forces aid in the fracturing of the penetrated medium. Conventional drills that use a single actuator are based on a complex mechanism with many parts and their use in future mission involves greater risk of failure and/or may require lubrication that can introduce contamination. In this paper, a compact drill is reported that uses a single piezoelectric actuator to produce hammering and rotation of the bit. A horn with asymmetric grooves was designed to impart a longitudinal (hammering) and transverse force (rotation) to a keyed free mass. The drill requires low axial pre-load since the hammering-impacts fracture the rock under the bit kerf and rotate the bit to remove the powdered cuttings while augmenting the rock fracture via shear forces. The vibrations ‘fluidize’ the powdered cuttings inside the flutes reducing the friction with the auger surface. This action reduces the consumed power and heating of the drilled medium helping to preserve the pristine content of the acquired samples. The drill consists of an actuator that simultaneously impacts and rotates the bit by applying force and torque via a single piezoelectric stack actuator without the need for a gearbox or lever mechanism. This can reduce the development/fabrication cost and complexity. In this paper, the drill mechanism will be described and the test results will be reported and discussed. KEYWORD: Piezoelectric drills, piezoelectric horn transducers, asymmetric grooves structures, rotary motion, ultrasonic impacts, USDC.
منابع مشابه
Auto-Gopher - a wire-line rotary-hammer ultrasonic drill
Developing technologies that would enable NASA to sample rock, soil, and ice by coring, drilling or abrading at a significant depth is of great importance for a large number of in-situ exploration missions as well as for earth applications. Proven techniques to sample Mars subsurface will be critical for future NASA astrobiology missions that will search for records of past and present life on ...
متن کاملDrilling, Coring and Sampling Using Piezoelectric Actuated Mechanisms: From the USDC to a Piezo-Rotary-Hammer Drill
NASA exploration missions are increasingly including sampling tasks but with the growth in engineering experience (particularly, Phoenix Scout and MSL) it is now very much recognized that planetary drilling poses many challenges. The difficulties grow significantly with the hardness of sampled material, the depth of drilling and the harshness of the environmental conditions. To address the requ...
متن کاملInfluence of Piezosurgery on Bone Healing around Titanium Implants: A Histological Study in Rats.
The aim of this study was to evaluate histomorphometrically the influence of two techniques of dental implant site preparation on bone healing around titanium implants. Fifteen male Wistar rats (±300 g) were used in the study. Each tibia was randomly assigned to receive the implant site preparation either with a conventional drilling technique (control - DRILL group) or with a piezoelectric dev...
متن کاملA Comparison of Conservation Technologies and Traditional Techniques for Sowing of Wheat
The conservation technologies and traditional techniques were evaluated at Adaptive Research Farm Gujranwala Pakistan during Rabi 2007-2008 and 2008-2009. The sowing techniques evaluated were broadcasting (T-1), Rotary Tillage Drill (T-2), Zero Tillage Drill (T-3) and Rabi Drill (T-4). Rotary Tillage Drill showed significantly high germination count (220.50 m -2 ) followed by Rabi Drill (211.50...
متن کاملDesign and Optimization of a Rotary Actuator for a Two Degree-of-Freedom zφ-Module
The paper concerns the design and optimization of a rotary actuator which is applied in a pick-and-place robot. The rotary actuator is part of a zφ-module and provides ±180°rotation. The rotor of this actuator is attached to a linear actuator which offers a z-motion of ±5 mm. In the paper, the optimal combinations of magnet poles and coils are determined for this slotless actuator with concentr...
متن کامل