Polymethyl methacrylate/hydrogen silsesquioxane bilayer resist electron beam lithography process for etching 25 nm wide magnetic wires

نویسندگان

  • Jean Anne
  • Saima Siddiqui
  • Sungmin Ahn
  • Larysa Tryputen
  • Geoffrey S. D. Beach
  • Marc A. Baldo
  • Jean Anne Currivan
  • Caroline A. Ross
چکیده

A method of patterning magnetic metallic thin films is presented using a bilayer polymethyl methacrylate and hydrogen silsesquioxane electron beam lithography resist mask combined with ion beam etching. The bilayer resist process allows for the combination of a high-resolution resist mask with easy postprocess removal of the mask without damage to the magnetic quality of the film. Co60Fe20B20 and Co/Ni multilayer films were patterned with electron beam lithography at 10–125 keV down to 25 nm wide features with 2 nm average root-mean square edge roughness. Both the in-plane and out-of-plane magnetic anisotropies of the respective film types were preserved after patterning. VC 2014 American Vacuum Society. [http://dx.doi.org/10.1116/1.4867753]

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Sub-10-nm half-pitch electron-beam lithography by using poly(methyl methacrylate) as a negative resist

Developing high-resolution resists and processes for electron-beam lithography is of great importance for high-density magnetic storage, integrated circuits, and nanoelectronic and nanophotonic devices. Until now, hydrogen silsesquioxane HSQ and calixarene were the only two reported negative resists that could approach sub-10-nm half-pitch resolution for electron-beam lithography. Here, the aut...

متن کامل

Electron beam lithography of HSQ/PMMA bilayer resists for negative tone lift-off process

A HSQ/PMMA bilayer resist system, in which HSQ as negative tone electron beam resist top layer and PMMA as bottom layer, has been investigated for negative tone lift-off process. Patterns are first defined on the HSQ resist using electron beam lithography, and then transferred into the bottom PMMA layer using oxygen reactive ion etching. Electron beam exposure of HSQ on top of PMMA layer has be...

متن کامل

Electron beam lithography patterning of sub-10 nm line using hydrogen silsesquioxane for nanoscale device applications

We investigated novel patterning techniques to produce ultrafine patterns for nanoscale devices. Hydrogen silsesquioxane HSQ was employed as a high-resolution negative tone inorganic electron beam resist. The nanoscale patterns with sub-10 nm linewidth were successfully formed. A trimming process of HSQ by the reactive ion etcher RIE played an important role for the formation of 5 nm nanowire p...

متن کامل

Sub-5 keV Electron-Beam Lithography in Hydrogen Silsesquioxane Resist

We fabricated 9 to 30 nm half-pitch nested Ls and 13 to 15 nm half-pitch dot arrays, using 2 keV electron-beam lithography with hydrogen silsesquioxane (HSQ) as the resist. All structures with 15 nm half-pitch and above were fully resolved. We observed that the 9 and 10-nm half-pitch nested L’s and the 13-nm-half-pitch dot array contained some resist residues. We obtained good agreement between...

متن کامل

Fabrication of high-density nanostructures by electron beam lithography*

We demonstrate a fabrication method to define high-density, uniform nanostructures by electron beam lithography at conventional beam voltages ~,40 kV!. Here we optimize the exposure and development conditions needed to generate such nanostructure arrays using polymethylmethacrylate as positive resist and isopropyl alcohol as a developer. Arrays of 12 nm dots with 25 nm period and 20 nm lines wi...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014