Cryogenic treatment of tungsten carbide reduces tool wear when machining medium density fiberboard
نویسنده
چکیده
igh-temperature corrosion/oxidation has been shown to be a major contributor to the wear of tungsten carbide when machining medium density fiberboard (MDF) (Stewart 1992). Consequently, a change in the properties of the tool material to resist wear from the adverse wood machining environment needs to be investigated. A deep cryogenic treatment shows promise as a tool material treatment for increasing tool life.
منابع مشابه
Check Tic-coated Tungsten Carbide Tool Wear in Machining Steel
In industrial production systems, including the most important factors in the economic field machining operations, reduce tool wear due to abrasive nature of the phenomenon on many factors, including temperature Lathe tool, influences, machining conditions (cutting speed, speed losses, forcing to rebuild parts of the manufacturing tolerances disassemble tool wear is caused by the phenomenon, as...
متن کاملMachinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling
17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...
متن کاملMachinability Improvement of 17-4PH Stainless Steel by Cryogenic Cooling
17-4PH stainless steel is a martensitic precipitation hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties, good toughness in both base metal and welds, and short time, low-temperature heat treatments that minimize warpage and scaling. This valuable alloy is widely used in the aerospace, nuclear, chemical, pet...
متن کاملExperimental Analysis of Cryogenic Treatment on Coated Tungsten Carbide Inserts in Turning
This research work presents the results of an experimental investigation of cryogenically treated, coated and uncoated tungsten carbide cutting tool inserts in turning of AISI 1040 steel. Three different tungsten carbide inserts coated with aluminum chromium nitride (AlCrN), titanium nitride (TiN) and uncoated WC were taken and treated cryogenically. Experiments were performed to evaluate the c...
متن کاملInvestigating the Effect of the Deep Cryogenic Heat Treatment on the Mechanical Properties and Corrosion Behavior of 1.2080 Tool Steel
Deep cryogenic heat treatment is assumed as a supplementary heat treatment performed on steels before the final tempering treatment to enhance the wear resistance and hardness of the steels. In this study, the effects of the deep cryogenic heat treatment on the wear behavior and corrosion resistance of the 1.2080 tool steel were studied using the wear testing machine and polarization and impeda...
متن کامل