Reducing Diesel Engine Drive Cycle Fuel Consumption through Use of Cylinder Deactivation to Maintain Aftertreatment Component Temperature during Idle and Low Load Operating Conditions
نویسندگان
چکیده
Citation: Joshi MC, Gosala DB, Allen CM, Vos K, Van Voorhis M, Taylor A, Shaver GM, McCarthy J, Jr. Stretch D, Koeberlein E and Farrell L (2017) Reducing Diesel Engine Drive Cycle Fuel Consumption through Use of Cylinder Deactivation to Maintain Aftertreatment Component Temperature during Idle and Low Load Operating Conditions. Front. Mech. Eng. 3:8. doi: 10.3389/fmech.2017.00008 reducing Diesel engine Drive cycle Fuel consumption through Use of cylinder Deactivation to Maintain aftertreatment component Temperature during idle and low load Operating conditions
منابع مشابه
Performance Evaluation and Emissions improving of Turbocharged DI Diesel Engine with Exhaust Gas Recirculation (EGR)
Nitrogen oxides (NOx) contribute to a wide range of environmental effects including the formation of acid rain and destroy ozone layer. In-cylinder high temperature flame and high oxygen concentration are the parameters which affect the NOx emissions. The EGR system is a very effective way for reducing NOx emission from a diesel engine (via reduction of these parameters), particularly at the...
متن کاملResearch of Intake Valve Deactivation on Engine Performance
In this paper, the effect of the Intake Valve Deactivation (IVDA) on engine performance is investigated in detail. Based on an optimization platform with Genetic Algorithm (GA) and engine thermodynamic model, the characteristics of the engine volumetric efficiency and pumping loss were studied under the cam-drive, Single Intake Valve (SIV) and Dual Intake Valves (DIV) operating modes, and the e...
متن کاملThe Effect of Cylinder Deactivation on the Performance Parameters of a Bi-fuel Engine
To meet consumer and legislation requirements, various technologies have been used worldwide to achieve optimal fuel consumption and to reduce greenhouse gas emissions. One of the proposed technologies is cylinder deactivation using various methods, including, injectors cutting off, closing the intake and exhaust valves and crankshaft decoupling. In this paper, a GT-Power model is created to in...
متن کاملImpact of Cylinder Deactivation on Active Diesel Particulate Filter Regeneration at Highway Cruise Conditions
Heavy-duty over-the-road trucks require periodic active diesel particulate filter regeneration to clean the filter of stored particulate matter. These events require sustained temperatures between 500 and 600°C to complete the regeneration process. Engine operation during typical 65mile/h highway cruise conditions (1200 rpm/7.6 bar) results in temperatures of approximately 350°C, and can reach ...
متن کاملCombustion Characteristics of a Diesel-hydrogen Dual Fuel Engine
Among the alternative fuels, hydrogen shows great potential in the near future. In the present study, hydrogen utilization as diesel engine fuel was investigated. Hydrogen can not be used directly in a diesel engine due to its autoignition temperature higher than that of diesel fuel. One alternative method is to use hydrogen in enrichment or induction. To investigate the combustion characterist...
متن کامل