Dynamic Behavior of Nanocomposites Reinforced with Multi-Walled Carbon Nanotubes (MWCNTs)
نویسندگان
چکیده
The influence of multi-walled carbon nanotubes (MWCNT) on the structural dynamic behavior of MWCNT/epoxy nanocomposites was investigated. Two different types of MWCNTs, pristine MWCNT and functionalized MWCNT, were used in this study. Carboxylic acid-functionalized MWCNTs (MWCNT-COOH) were obtained by oxidation pristine MWCNTs via sonication in sulfuric-nitric acid and characterized by Fourier transform infrared spectroscopy (FTIR). Dynamic behaviors of the MWCNT reinforced nanocomposite including the natural frequency and damping ratio were determined using free vibration test. Experimental results showed that the damping ratio of the nanocomposite decreases with the increase of the MWCNT addition, while the natural frequency is increasing with the increase of the MWCNT addition. Functionalized MWCNTs improved the interfacial bonding between the nanotubes and epoxy resin resulting in the reduction of the interfacial energy dissipation ability and enhancement of the stiffness.
منابع مشابه
Plasma Treated Multi-Walled Carbon Nanotubes (MWCNTs) for Epoxy Nanocomposites
Plasma nanocoating of allylamine were deposited on the surfaces of multi-walled carbon nanotubes (MWCNTs) to provide desirable functionalities and thus to tailor the surface characteristics of MWCNTs for improved dispersion and interfacial adhesion in epoxy matrices. Plasma nanocoated MWCNTs were characterized using scanning electron microscopy (SEM), high-resolution transmission electron micro...
متن کاملNanomechanical Behavior of Multi-Walled Carbon Nanotubes Particulate Reinforced Aluminum Nanocomposites Prepared by Ball Milling
The nanomechanical properties of carbon nanotubes particulate-reinforced aluminum matrix nanocomposites (Al-CNTs) have been characterized using nanoindentation. Bulk nanocomposite specimens containing 2 wt % multiwalled CNTs (MWCNTs) were synthesized by a combination of ball milling and powder metallurgy route. It has been tried to understand the correlation between microstructural evolution pa...
متن کاملPreparation and characterization of nanocomposites based on COOH functionalized multi-walled carbon nanotubes and on poly(trimethylene terephthalate)
Poly(trimethylene terephthalate) nanocomposites containing COOH functionalized multi-walled nanotubes were synthesized with in situ polymerization method. The microstructure of the nanocomposites was studied by SEM, in terms of the dispersion state of the nanotubes and the polymer–nanotube interface. The thermal behaviour, mechanical properties and conductivity of these resultant PTT/MWCNTs nan...
متن کاملTensile and Morphological Properties of Microcellular Polymeric Nanocomposite Foams Reinforced with Multi-walled Carbon Nanotubes
Polyamide 6 (PA6) is used in many applications due to its advantages and improving its properties seems essential. For this purpose in the present study, PA6 was melt compounded with various multi-walled carbon nanotubes (MWCNTs) contents and then was foamed using Azodi carbon amide (ACA) as blowing agent under different injection molding conditions. Morphological properties were investigated u...
متن کاملA Case Study for Fabrication of MWCNT-TiO2 Hybrid Reinforced Aluminium Matrix Nanocomposites
One of the most important applications of carbon nanotubes (CNTs) is as reinforcement of metal matrix composites, because of their excellent mechanical properties. In this study, Al-TiO2-multi walled carbon nanotubes (MWCNTs) nanocomposite is fabricated using isostatic pressing followed by hot extrusion. Mechanical alloying is used to mix powders of aluminium, TiO2 and MWCNTs. TiO2 with the amo...
متن کامل