Spectrophotometric evaluation of color changes of bleach-shade resin-based composites after staining and bleaching.
نویسندگان
چکیده
UNLABELLED Spectrophotometric evaluation of color changes of Bleach-shade resin-based composites after staining and bleaching. AIM The aim of this study was to evaluate the color stability of two commercially available bleach-shade resin composites (RC) after exposure to 3 storage solutions and the effect of 3 bleaching agents on the color stability and stain removal from stained RC. MATERIALS AND METHODS Two bleach-shade RC were evaluated in this study, including a nanoflled RC, Filtek(TM) Z350 XT (FZ), and a nanohybrid RC, Tetric(®) N-Ceram (TC), in the extra-white body (shade) (XWB) and L shades, respectively. Twenty-seven disk-shaped specimens, each measuring 12 mm in diameter and 2 mm in thickness, were prepared for each RC, with a total of 54 specimens. Specimens were randomly allocated into 3 groups of 9 specimens each and immersed in 3 storage solutions (distilled water, tea and coffee) for 7 days period. The 9 specimens in each staining group were further divided into 3 subgroups. Specimens in each subgroup (n = 3) were bleached using one of the bleaching agents (10 and 16% Zoom NiteWhite amorphous calcium phosphate (ACP), and Zoom 2 chairside with light activation) for 5 days period. The specimen colors were measured with spectrophotometer. The measurements were performed on each sample three times at baseline, after staining, and after bleaching. Color was expressed using the commission international de I'Eclairage (CIE) L*a*b* color space. The color differences (ΔE) between the three measurements were calculated and the results were statistically analyzed using Two-way and Three-way analysis of variance (ANOVA) and Tukey's posthoc tests. Level of significance was set at p < 0.05. RESULTS Tetric(®) N-ceram materials demonstrated significantly less color change than the FZ and the color change, which was greater after storage in coffee compared to tea, was statistically significant. The bleaching agents significantly influence the color changes of composite specimens. All groups showed (ΔE) values below 3.3 after bleaching, except for 'Zoom 2 chairside' with light activation groups, which is shown clinically unacceptable lighter shade (ΔE >3.3). CONCLUSION Bleach-shade composites showed significant discoloration (ΔE > 3.3) after being immersed into coffee and tea solutions. Nanoflled composites discolored more than nano-hybrid composites, and carbamide peroxide-based bleaching agents were effective in reducing the discoloration to a clinically acceptable value (ΔE > 3.3).
منابع مشابه
Effects of Carbamide Peroxide Bleaching Gel on Color of Silorane- and Methacrylate-based Resin Composites
Introdouction: Bleaching has become a common treatment for improving the appearance of natural teeth. However, the need to protect dental restorations from bleaching agent exposure is inevitable, as these agents may change the color of restorative materials by oxidation. Filtek P90 composite resin has recently been introduced with the aim of decreasing polymerization shrinkage. The purpose of...
متن کاملThe effects of two types of bleaching agents on color and translucency changes of three types of composite with or without surface rebounding
Background and Aims: The bleaching agents can lead to color and translucency changes in composite resins. Due to the increasing use of the nano composites and the silorane-based composites, this study aimed at examining the color and translucency changes of these restorations after bleaching agents. Materials and Methods: In this experimental - laboratory study, 198 composite discs were divide...
متن کاملEffects of 15% Carbamide Peroxide and 40% Hydrogen Peroxide on the Microhardness and Color Change of Composite Resins
OBJECTIVE The aim of this study was to determine the effects of 40% hydrogen peroxide and 15% carbamide peroxide on microhardness and color change of a silorane-based composite resin in comparison with two methacrylate-based composites. MATERIALS AND METHODS Fifty-four disc-shaped specimens (A3 shade) were fabricated of Filtek P90 (P90), Filtek Z350XT Enamel (Z350) and Filtek Z250 (Z250) (3ME...
متن کاملEffects of staining and bleaching on a nanohybrid composite with or without surface sealant
OBJECTIVE The effect of different staining solutions and a bleaching procedure on color stability and surface roughness of a nanohybrid resin composite were evaluated with or without liquid resin polishing (RP). MATERIALS AND METHODS Ninety-six disc-shaped resin composite specimens (A1 Shade, Z550 Filtek 3M ESPE, St. Paul, MN, USA) were prepared and divided randomly into two groups (n = 48). ...
متن کاملEffect of Photo-Fenton Bleaching on Tetracycline-stained Dentin in vitro.
AIM Tetracycline-stained tooth structure is difficult to bleach using nightguard tray methods. The possible benefits of in-office light-accelerated bleaching systems based on the photo-Fenton reaction are of interest as possible adjunctive treatments. This study was a proof of concept for possible benefits of this approach, using dentine slabs from human tooth roots stained in a reproducible ma...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The journal of contemporary dental practice
دوره 15 5 شماره
صفحات -
تاریخ انتشار 2014