A Study on High Mechanical Efficiency of a Scroll Compressor with Fixed Cylinder Diameter

نویسندگان

  • N. Ishii
  • M. Yamarnura
  • S. Muramatsu
  • S. Yamada
  • M. Takahashi
  • Shigeru Muramatsu
چکیده

This paper presents the optimum combination of major parameters for high mechanical efficiency of a compact scroll compressor with a fixed cylinder diameter. The mechanical efficiency was calculated for a number of cylinder volumes, where the cylinder diameter and the scroll thickness were fixed at a constant value of 75.7 mm and 4 mm, respectively, and combinations of the involute base circle radius, the scroll depth and the number of scroll turns were varied. The calculated results indicate that there is a definite optimum combination of major parameters, and with decreasing cylinder volume, selection of the optimum combination becomes more significant for higher mechanical efficiency. In addition, the physical basis of the optimum combination of major parameters was examined by showing the characteristics of the frictional power loss at each pair.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Vibration Analysis of an Air Compressor Based on a Hypocycloidal Mechanism: an Experimental Study

In this paper, the experimental vibration analysis of a single cylinder air compressor based on a hypocycloid straight line mechanism (HSM) is investigated. The HSM mechanism uses planetary gears to convert rotational motion to purely linear motion. In the conventional air compressor, the slider- crank mechanism is replaced by the HSM mechanism with appropriate counterweights. The constructed s...

متن کامل

Development of High Performance 3D Scroll Compressor

This paper describes the efficiency improvement technology of the 3D scroll compressors and the development of 3D scroll compressor for commercial air-conditioner. 3D scroll, our newly developed profile, can compress refrigerant not only radially but also axially. Therefore, higher compression ratio, higher reliability and larger capacity are obtained by introducing 3D scroll. Since the 3D scro...

متن کامل

Performance Evaluation of the Energy Efficiency of Crank-Driven Compressor and Linear Compressor for a Household Refrigerator

Since conventional crank-driven compressor had many difficulties to increase efficiency due to mechanical loss, new kind of compressor has been paid much of attention by the compressor manufacturers. The free piston compressor mechanism has been one of those kinds. The compressor manufacturers developed an energy efficient free piston linear resonance compressor for a household refrigerator. In...

متن کامل

The Mechanical Analysis of a Scroll Compressor

Based on thermodynamic and mechanical models. the axial and tangential forces acting on the orbiting scroll and their balance methods are discussed in this paper. Besides, a detailed analysis of orbiting mechanism of three Pins is carried out too. INTRODUCTION The advantageous characteristics of scroll compressor have been pr1>ved in theory and experiment [ 1 ] [ 3 ] in rer.ent years. Remarking...

متن کامل

A Research of Scroll Compressor Working Process Computer Simulation and Testing

Thi~ paper is baaed on the working principle of scroll compressor and after investigating the ga~ flow condition, in especial analysis the gas leaking situation between two scroll parts mutual gearing, which influence the compressor performance very much. The working process calculating model is set up, employ the soroll compressor geometric parameter, size~ error of parts manufactured as well ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2014