Laser-Induced Carbon Pyrolysis of Electrodes for Neural Interface Systems
نویسندگان
چکیده
The objective of this work is to produce a laser- fabricated polymer-metal-polymer electrode with the merit of a carbon-based coating as the active site. A 10 µm-thick layer of parylene-C is used serving as the insulation layer in which the active site is locally laser-pyrolyzed. Our preliminary results show that the proposed method is promising in terms of fabrication feasibility and desired electrochemical capabilities.
منابع مشابه
Comparison of Binary and Ternary Compositions of Ni-Co-Cu Oxides/VACNTs Electrodes for Energy Storage Devices with Excellent Capacitive Behaviour
Electrochemical performance of binary and ternary oxides composed of Ni, Co and Cu produced over a 3-dimensional substrate of vertically aligned carbon nano-tubes (VACNT) as electrodes for aqueous energy sources, is reported and compared in this paper. VACNTs were fabricated inside a DC-plasma enhanced chemical vapor deposition chamber and composite materials fabricated by thermal decomp...
متن کاملPyrolysis Processing for Solid Waste Resource Recovery in Space
The NASA objective of expanding the human experience into the far reaches of space will require the development of regenerable life support systems. A key element of these systems is a means for solid waste resource recovery. The objective of this work was to demonstrate the feasibility of pyrolysis processing as a method for the conversion of solid waste materials in a Controlled Ecological Li...
متن کاملبررسی نمک‌زدایی آب‌های شور و لب‌شور با استفاده از فناوری آیروژل کربنی
MicrosoftInternetExplorer4 Background and Objectives: The increasing demand for drinking water has led scientists to the use of saline waters, but existing desalinating processes are very expensive. carbon aerogel is a type of organic aerogel that is suitable for desalination owing to its unique porous structure. Low potential of fouling and deposits, very low wastewater production, elec...
متن کاملUltraflat carbon film electrodes prepared by electron beam evaporation.
A facile method for the preparation of thin-film carbon electrodes by electron beam evaporation onto highly doped silicon is presented. The physical and electrochemical properties of these films both before and after postdeposition pyrolysis are investigated. Raman spectroscopy establishes the amorphous structure of the nonpyrolyzed carbon films and confirms the formation of graphitic carbon af...
متن کاملLi-ion microbatteries generated by a laser direct-write method
A laser-based direct-write process is demonstrated as a method to fabricate Li-ion microbatteries. The battery electrodes are made by the laser-induced forward transfer of inks of charge-storage materials (composites of carbon/binder and LiCoO2/carbon/binder) onto micromachined metal-foil current collectors to form 40–60 m thick electrodes with 16 mm2 (4 mm × 4 mm) footprints. Both half cells a...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره 26 شماره
صفحات -
تاریخ انتشار 2016