Tensioning the helix: a mechanism for force generation in twining plants.
نویسندگان
چکیده
Twining plants use their helical stems to clasp supports and to generate a squeezing force, providing stability against gravity. To elucidate the mechanism that allows force generation, we measured the squeezing forces exerted by the twiner Dioscorea bulbifera while following its growth using time-lapse photography. We show that the development of the squeezing force is accompanied by stiffening of the stem and the expansion of stipules at the leaf base. We use a simple thin rod model to show that despite their small size and sparse distribution, stipules impose a stem deformation sufficient to account for the measured squeezing force. We further demonstrate that tensioning of the stem helix, although counter-intuitive, is the most effective mechanism for generating large squeezing forces in twining plants. Our observations and model point to a general mechanism for the generation of the twining force: a modest radial stem expansion during primary growth, or the growth of lateral structures such as leaf bases, causes a delayed stem tensioning that creates the squeezing forces necessary for twining plants to ascend their supports. Our study thus provides the long-sought answer to the question of how twining plants ascend smooth supports without the use of adhesive or hook-like structures.
منابع مشابه
Codonopsis pilosula twines either to the left or to the right
We report the twining handedness of Codonopsis pilosula, which has either a 9 leftor right-handed helix among different plants, among different tillers within a 10 single plant, and among different branches within a single tiller. The handedness was 11 randomly distributed among different plants, among the tillers within the same plants, 12 but not among the branches within the same tillers. Mo...
متن کاملEffects of Helix Angle Variations on Stability of Low Immersion Milling
The stability behavior of low immersion helical end milling processes is investigated in this paper. Low radial immersion milling operations involve interrupted cutting which induces chatter vibration under certain cutting conditions. Time Finite Element Analysis (TFEA) is suggested for an approximate solution for delayed differential equations encountered during interrupted milling. An improve...
متن کاملFEM investigation of drilling conditions on heat generation during teeth implantation
Abstract The first step of implanting teeth is to drill a hole in the jaw bone. Excessive temperature produced during drilling is one of the destructive factors for bony tissue. If the temperature generation during surgical drilling exceeds the critical temperature, it could lead to osteonecrosis. This research intends to study drilling parameters such as drilling speed, feed rate, cooling con...
متن کاملکارآیی گیاهان گلخانهای دراسنا و عشقه در کاهش بنزن موجود در هوا
Background:Benzene, as a carcinogen, is a volatile substance emitted in many workplaces including large plants, small factories, laboratories, hospitals, offices, and even homes. To assess the ability of Dracaena deremensis and Hedera helix plants for removing benzene, this study was conducted. Methods:In a laboratory trial study,6 two-year old plants were exposed to 46 microliter of benzene i...
متن کاملبررسی اثر مختصات مهاربندی بر نیروهای مهاری شناورهای پانتونی چند ردیفه
Simultaneous effects of mooring characteristics and waves heading on mooring forces of a multi-rows floating pier which is composed of pontoons have been investigated in this paper. The investigated variable parameters include the moorings array, number of mooring lines and their pretensions. A floating structure consisting of 12 pontoons connected together with rigid connectors and is located ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Proceedings. Biological sciences
دوره 276 1667 شماره
صفحات -
تاریخ انتشار 2009