Analysis of the pressure, density, and velocity distributions in a spectroscopic heat‐ pipe oven and the resulting limitations on device performance
نویسندگان
چکیده
Articles you may be interested in Chemiluminescent reactions in a heat‐pipe oven Th~ pr~ss.ure, density, .and velo~ity .distributions within a cylindrical heat-pipe oven are analyzed for I~VISCld: compressible flow m either the radial or axial direction. For sufficiently large but readdy attamable heat flows, density variations within the heat pipe as large as 50% which can lead to inaccuracies in quantitative spectroscopic investigations are predicted.
منابع مشابه
Modeling and Analysis of Viscous Dissipation Phenomenon on Temperature Distribution in the Process of Injection Explosive Fluid
The explosive viscous liquid becomes inject to warhead by discharge system. The injection device is consisted of a piston to move down and leads the viscous fluid through the cylindrical pipe towards the end of the duct. Then the viscous fluid leads into a convergent path that will be injected to the warhead or other injection equipment. In this project, the path of viscous fluid flow is divide...
متن کاملExperimental Investigation on Hydrodynamic and Thermal Performance of a Gas-Liquid Thermosyphon Heat Exchanger in a Pilot Plant
Waste heat recovery is very important, because not only it reduces the expenditure of heat generation, but also it is of high priority in environmental consideration, such as reduction in greenhouse gases. One of the devices is used in waste heat recovery is heat pipe heat exchanger.Anexperimental research has been carried out to investigate the hydrodynamic and thermal performance of a gas...
متن کاملFlow and Pressure Distributions in Short Heat Exchanger Cores with Abrupt Entrance and Exit
The typical installation of a heat exchange device usually involves a flow contraction at the core entrance and a flow expansion at the core exit. Repeated flow Contraction and expansion are experienced in the flow passages of some compact heat exchangers. The latter refers to the flow passages in the plate-fin type with louvered fins or stripped fins and in the tubular type with dimpled-circul...
متن کاملAnalysis of flow and heat transfer characteristics of an asymmetrical flat plate heat pipe
An in-depth integral analysis revealing various physical aspects of an asymmetrical flat plate heat pipe is presented in this work. The resulting psuedo-three-dimensional vapor phase Row field is bifurcated on the X-J’ plane due to the asymmetrical nature of the heat source and sinks. The analytical results for the shifted vapor velocity profiles on the x-y plane, the overall axial pressure dis...
متن کاملEnergy Conservation Potential of the Heat Pipe Heat Exchangers: Experimental Study and Predictions
The energy conservation potential of the heat pipe based heat exchangers (HPHXs) was studied in this research. To this end, a typical climate chamber as the representative of an air conditioning system was established. The performance characteristic of a typical eight-row HPHX was obtained based on the one week operation (168 h) to determine the performance characteristic curves. The coil face ...
متن کامل