Instabilities of a Thermo - Mechano - Chemical System
نویسنده
چکیده
A Hadamard instability analysis of the partial differential equations governing a coupled thermo-mechano-chemical system predicts instability of the spinoidal decomposition type as well as instability of the "negative creep" type.
منابع مشابه
ZnO meso-mechano-thermo physical chemistry.
Jianwei Li,† Shouzhi Ma,‡ Xinjuan Liu, Zhaofeng Zhou,† and Chang Q Sun*,†,‡ †Institute for Quantum Engineering and Micro-Nano Energy Technology, Key Laboratory of Low-Dimensional Materials and Application Technologies, and Faculty of Materials and Optoelectronics and Physics, Xiangtan University, Hunan 411105, China ‡School of Electrical, and Electronic Engineering, Nanyang Technological Univer...
متن کاملCoarse grain model for coupled thermo-mechano-chemical processes and its application to pressure-induced endothermic chemical reactions
We extend a thermally accurate model for coarse grain dynamics (Strachan and Holian 2005 Phys. Rev. Lett. 94 014301) to enable the description of stressinduced chemical reactions in the degrees of freedom internal to the mesoparticles. Similar to the breathing sphere model, we introduce an additional variable that describes the internal state of the particles and whose dynamics is governed both...
متن کاملComparison between accelerated thermo - hydro aged wood and naturally aged wood
The effects of aging in wood in term of physical, mechanical and chemical degradation has been studied first by Jiro Kohara [1] and more recently by Erhardt et al. [2-3] and Obataya [4]. It has been observed that similar degradation can be found in thermo-hydro (TH) treated wood [4]. The aim of this study is to compare the mechanical behavior of naturally aged and accelerate TH wood in the radi...
متن کاملNonlinear Vibration and Instability Analysis of a PVDF Cylindrical Shell Reinforced with BNNTs Conveying Viscose Fluid Using HDQ Method
Using harmonic differential quadrature (HDQ) method, nonlinear vibrations and instability of a smart composite cylindrical shell made from piezoelectric polymer of polyvinylidene fluoride (PVDF) reinforced with boron nitride nanotubes (BNNTs) are investigated while clamped at both ends and subjected to combined electro-thermo-mechanical loads and conveying a viscous-fluid. The mathematical mode...
متن کاملIn-Situ Polymerization of UHMWPE Using Bi-Supported Ziegler-Natta Catalyst of MoS2 Oxide/MgCl2 (Ethoxide Type)/TiCl4/TiBA: Study of Thermo-Mechanical Properties of System
The use of UHMWPE has attracted the attention of many researchers and industries. The aim of the present work is to fabricate UHMWPE/MoS2-Oxide nano-composites using in-situ polymerization. For this purpose, modified molybdenum disulfide was used. In order to perform the polymerization, a Ziegler-Natta catalytic system, with MoS2-Oxide and magnesium Ethoxide as support, was used. In order to fa...
متن کامل