Modeling of Internal Melt Ice-on-coil Tank
نویسندگان
چکیده
Internal melt ice-on-coil tank with built-in horizontal tubes is a kind of ice tank used widely. Its discharge process is effected greatly by density different between ice and water. The existing models developed for internal melt ice-on-coil tank are concentric cylinder models which are applicable to tank with built-in vertical tube or to case when all water in tank is frozen, but is not applicable to describing the effect of density difference between ice and water on discharge. This paper introduces an eccentric cylinder model developed especially for discharge process in this kind of tank with built-in horizontal tubes. The model has simple form and is suitable for system simulation. Experimental validation proved the reliability of the model.
منابع مشابه
Modeling and Simulation of Discharging Characteristics of External Melt Ice-on Coil Storage System
In case of energy storage air conditioning system, due to load fluctuation, the traditional control methods can't obtain good effect, the model predictive control method can realize the optimization control system, and can overcome the influence of load fluctuation. In order to realize the predictive control, need to study model of air conditioning system. Ice storage air-conditioning system, b...
متن کاملStudy on Effective Use of an Ice Thermal Storage System with Simulation
It is important to evaluate whether an ice thermal storage system can operate effectively as the way planned at the design stage. While designing an ice thermal storage system, generally, the thermal storage time is calculated by using rated capacity of refrigerator or the heat exchange capacity of ice-on-coil, and the heating capacity time is calculated by using the average ice melting ability...
متن کاملComparison of different turbulence models in a high pressure fuel jet
In this study, modeling of a fuel jet which has been injected by high pressure into a low-pressure tank are investigated. Due to the initial conditions and the geometry of this case and similar cases (like CNG injectors in internal combustion engines (ICE)), the barrel shocks and Mach disk are observed. Hence a turbulence and transient flow will be expected with lots of shocks and waves. Accord...
متن کاملThe importance of insolation changes for paleo ice sheet modeling
The growth and retreat of continental ice sheets in the past has largely been a response to changing climatic forcing. Since ablation is the principal component of mass loss for land-based ice sheets, the calculation of surface melt is an important aspect of paleo ice sheet modeling. Changes in insolation are often not accounted for in calculations of surface melt, under the assumption that the...
متن کاملSediment Melt-Migration Dynamics in Perennial Antarctic Lake Ice
We examined sediment melt-migration dynamics in the ice cover of Lake Fryxell, Taylor Valley, McMurdo Dry Valleys, Antarctica, using a combination of laboratory experiments, field observations, and modeling. The specific objectives were to determine the thermal conditions required for sediment melt and how sediment migration rates vary with meteorological forcings and ice microstructure. These ...
متن کامل