Contactless Inductive Bubble Detection in a Liquid Metal Flow
نویسندگان
چکیده
The detection of bubbles in liquid metals is important for many technical applications. The opaqueness and the high temperature of liquid metals set high demands on the measurement system. The high electrical conductivity of the liquid metal can be exploited for contactless methods based on electromagnetic induction. We will present a measurement system which consists of one excitation coil and a pickup coil system on the opposite sides of the pipe. With this sensor we were able to detect bubbles in a sodium flow inside a stainless steel pipe and bubbles in a column filled with a liquid Gallium alloy.
منابع مشابه
Contactless Inductive Flow Tomography: A Liquid Metal Flow Measuring Technique Complementary to UDV
The aim of the Contactless Inductive Flow Tomography (CIFT) is the reconstruction of flow structures in metal and semiconductor melts. It relies on the induction of electric currents in moving conductors exposed to magnetic fields. The flow induced deformations of various applied magnetic fields can be measured in the exterior of the melt and utilized for the reconstruction of the velocity fiel...
متن کاملContactless inductive flow tomography.
The three-dimensional velocity field of a propeller-driven liquid metal flow is reconstructed by a contactless inductive flow tomography. The underlying theory is presented within the framework of an integral equation system that governs the magnetic field distribution in a moving electrically conducting fluid. For small magnetic Reynolds numbers this integral equation system can be cast into a...
متن کاملExperimental investigation of bubble growth and detachment in stagnant liquid column using image – based analysis
An experimental study has been carried out to characterize bubble formation, growth, and detachment mechanisms in a stagnant liquid column. Both bubble frequency and bubble detachment size were measured in different gas flow rates, injector diameters and orientations, submergence height, and liquid properties. Experiments were performed for air injection flow rate ranges between 200 mlph and 12...
متن کاملA method for detecting bubbles in two-phase gas-liquid flow
Detecting bubble in two-phase flow has been a basic issue in two-phase flow systems. A new method for measuring the frequency of bubble formation is presented in this paper. For this purpose, an electronic device was designed and constructed which works based on a change in intensity of laser beam. For this purpose, continues light beam is embedded just above the needle, which is received by a ...
متن کاملCFD Hydrodynamics Analysis of Syngas Flow in Slurry Bubble Column
In this paper, a CFD model of syngas flow in slurry bubble column was developed. The model is based on an Eulerian-Eulerian approach and includes three phases: slurry of solid particles suspended in paraffin oil and syngas bubbles. Numerical calculations carried out for catalyst particles, bubble coalescence and breakup included bubble-fluid drag force and interfacial area effects. Also, the ef...
متن کامل