A Phased Array Inspection Solution for the Assessment of Thin Stainless Welds

نویسنده

  • D P J Bell
چکیده

EDF Energy has the requirement to detect and size lack of penetration type defects in thin-walled stainless steel components. A high frequency ultrasonic phased array inspection technique has been successfully developed and applied to thin walled pipes and is currently used as an ENIQ qualified inspection on nuclear plant. The welds are manufactured with an autogenous Tungsten Inert Gas (TIG) welding technique. This type of technique can generate unique defects. The thin wall requires a high resolution very reliable, non-destructive evaluation method to provide accurate defect sizing. This paper discusses a one-stop phased array inspection system and with a highly reliable defect sizing capability for examining thin-walled pipe of different geometries and varied diameters. In addition this paper demonstrates the operator qualification process undertaken to validate the inspection method.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Core Shroud Inspection Coverage and Inspection Time Improvements through Phased Array Technique and Manipulator Improvements

In December 2006, the Boiling Water Reactor Vessel and Internals Project (BWRVIP) issued a letter mandating two-sided coverage for the volumetric examination of BWR core shroud welds. In this letter, they noted that: “Ultrasonic flaw detection and sizing performance is degraded by stainless steel or nickel allow weld metal. The base metal examination volumes on both sides of the weld should be ...

متن کامل

Austenitic and Bi-Metallic Weld Inspection I Inspection of Dissimilar Metal Welds in Nozzles using Ultrasonic Phased Array and Eddy Current - Robinson Nuclear Power Plant

IHI Southwest Technologies (ISwT) provided Reactor Coolant System, Hot and Cold Leg Nozzle examinations in accordance with MRP-139, “Materials Reliability Program: Primary System Piping Butt Weld Inspection and Evaluation Guideline,” at the Robinson Nuclear Plant. During this outage volumetric inspections were performed using ultrasonic examination techniques qualified to meet the requirements ...

متن کامل

The Ultrasonic Phased Array Inspection Technology Used in Tubular Joint Welds of Offshore Platform Structures

Aimed at the practical requirement of tubular joint welds inspection of offshore platform structures, the ultrasonic phased array inspection algorithm for offshore platform structures is proposed in this paper, and the ultrasonic phased array inspection system for offshore platform structures is developed. The experiment of tubular joint model is performed with the ultrasonic phased array inspe...

متن کامل

Ultrasonic Inspection of Pressure Vessel Construction Welds using Phased Arrays

Ultrasonic phased arrays are a new technology that offers considerable potential for inspecting construction welds. Using electronic control of the beam, phased arrays can scan, sweep, steer and focus the ultrasound. Since welds typically produce defects of known character and orientation, phased arrays can be programmed to optimize weld inspections. These inspections include standard ASME-type...

متن کامل

Curved Arrays for Improved Inspection of Small Pipe Welds

This paper describes computer modeling and testing of phased arrays curved in the passive axis to improve focusing on small diameter pipe welds; in practice, a couple of curvatures satisfy most diameter and wall thickness applications. The modeling was followed by experimental testing using one of the curved arrays. Not surprisingly, the curved array showed significant improvements over a flat ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012