New technology of Polyamideimide wire enamels
نویسنده
چکیده
Polyamideimide coatings on magnet wire offer the best performance in chemical resistance and toughness. The thermal properties of polyamideimide coatings are also outstanding when compared to the cost of polyimide resins. Recent developments in polyamideimide resins are discussed and future trends-product offerings are also reviewed. Developments include corona resistance enamels, self-lubricated and high abrasion resistance coatings. The hybrid car industry offers opportunities for further innovations in magnet wire coatings.
منابع مشابه
Voltage and Pulse Endurance Test of New Generation wire CORONA - RTM developed
Inverters are commonly used in various motor applications. This greatly increases the pulse endurance stress of the wire due to switching transience. A new type of wire with two layers & three layers of Corona resistant material has been developed by BCwire® to overcome the aforementioned problem. This paper will give a brief introduction of the wire, detailed test procedure, and preliminary re...
متن کاملAl(III) Coated Wire Selective Electrode Based on 5-Bromo(salicylidene-2-aminothiophenol) Schiff Base as a New Ionophore
A new Al(III) selective membrane based on 5-bromo(salicylidene-2-amino thiophenol) as a neutral carrier in a poly(vinyl chloride) (PVC) matrix is coated on platinum wire to determine trace amounts of Al(III) ion in various samples. The sensor exhibits a good response for Al(III) ion over a wide concentration range of 5.20 × 10-7 to 1.00 × 10-2 M with Nernstian slope of 19...
متن کاملStatic Strain Aging Behavior of Low Carbon Steel Drawn Wire
The static strain aging is a phenomenon that can change the mechanical properties of low carbon steels. Thus, the static strain aging behavior of low carbon steel wires after drawing process is studied. To do so, the wires are austenitized at different temperatures and cooled in different rates. Then the wires are drawn and aged at a specific temperature and time. Before and after aging of each...
متن کاملOptimisation of wire-cut EDM process parameter by Grey-based response surface methodology
Wire electric discharge machining (WEDM) is one of the advanced machining processes. Response surface methodology coupled with Grey relation analysis method has been proposed and used to optimise the machining parameters of WEDM. A face centred cubic design is used for conducting experiments on high speed steel (HSS) M2 grade workpiece material. The regression model of significant factors such ...
متن کاملDesign and Test of New Robust QCA Sequential Circuits
One of the several promising new technologies for computing at nano-scale is quantum-dot cellular automata (QCA). In this paper, new designs for different QCA sequential circuits are presented. Using an efficient QCA D flip-flop (DFF) architecture, a 5-bit counter, a novel single edge generator (SEG) and a divide-by-2 counter are implemented. Also, some types of oscillators, a new edge-t...
متن کامل