A Substitute of Roots Blower - Monotooth Rotary Compressor
نویسندگان
چکیده
Having builtin compression process, monotooth rotary compressor can reach larger discharge pressure with higher efficiency and lower discharge temperature when compared with Roots blower. So it is a good alternative for Roots blower used in various fields. In order to put this kind of compressor into market as soon as possible, theoretical and experimental study of the monotooth rotary compressor is carried out in this paper.
منابع مشابه
اتاقک سازی به منظور کنترل صدای دستگاه دمنده هوا در یک صنعت فولاد
Background and aims: In the steel industry, air blowers used to supply compressed air are considered as sources of annoying noise . This study aims to design an acoustic room chamber in order to control the noise level of the air blower. Methods: Measuring of the noise level along with frequency analysis was performed by using sound level meter, model ofCASELLA-Cell.450 . Dosimetery was per...
متن کاملInfluence of Lubricant on Rotary Compressor Using R407C
The selection of lubricant is a key point in developing rotary compressor using R407C as a substitute for R22. The viscosity of oil, miscibility with refrigerant, thermal stability and compatibility with motor materials, etc, are all considerations. Furthermore, by reason of the POEs are more hygroscopic than mineral oils, hydrolytic stability and hygroscopicity of the selected oil must be cons...
متن کاملOperation Analysis of Rotary Tools of Compressor Station Using Exergy Approach
In this study, operation of compressor station has been investigated by exergy approach. Exergy analysis is a thermodynamic method which shows the irreversibility of a system quantitatively. Gas compressors are used to compensate the pressure drop along the gas pipeline significantly. The compression process causes temperature rise of gas; in this regard gas cooler is applied to reduce the temp...
متن کاملDreistufiger Kolbenkompressor mit vorgeschaltetem Drehkolbenkompressor: Teil 2, Regelung
per is concerned with the control of a three-stage compressor with upstream roots blower. Based on the detailed mathematical model derived in the first part of this contribution, a simplified model for controller design is developed in this part by exploiting the periodicity of the system variables of the piston compressor. Afterwards, a nonlinear multiva-riable control strategy is proposed for...
متن کاملUnder-Compression (Over-Expansion) – An Isochoric Or Adiabatic Process?
It has long been established that for a Positive Displacement (PD) compressor or expander such as reciprocating or rotary screw type, the thermodynamic process is adiabatic when compressor or expander discharge pressure is equal to system back pressure (or 100% internal compression or expansion). At this design point, compressor or expander efficiency and noise are most desirable. But more ofte...
متن کامل