Cutting-Edge Timing Analysis Techniques

نویسنده

  • Jakob Zwirchmayr
چکیده

This text gives an overview about my current research in timing analysis at the Vienna University of Technology. After a short introduction to the topic follows the description of an approach relying on CLP, the implicit path enumeration technique (IPET). This technique is also used in a tool developed at the institute of Computer Languages (TuBound). Current timing analysis tools suffer from a few flaws worth further investigation in order to achieve better results than current state-of-the-art timing analysis tools.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets

This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...

متن کامل

Pressure blades and total cutting edge: an experiment in lithic technology.

Pressure techniques were used to remove 83 blades from a preformed obsidian core weighing 820 grams, yielding 17.32 meters of acute cutting edge. The blades represented 91 percent of the original weight (2.1 centimeters of acute cutting edge per gram of original material), thus demonstrating the efficiency of the pressure-blade techniques for the production of acute cutting edges.

متن کامل

An Instantaneous Rigid Force Model For 3-Axis Ball-End Milling Of Sculptured Surfaces

An instantaneous rigid force model for prediction of cutting forces in ball-end milling of  sculptured surfaces is presented in this paper. A commercially available geometric engine is used to represent the cutting edge, cutter and updated part geometries. The cutter used in this work is an insert type ball-end mill. Intersecting an inclined plane with the cutter ball nose generates the cutting...

متن کامل

Finite Element Analysis of The Influence of Edge Roundness on The Stress and Temperature Fields Induced by High Speed Machining

High speed machining (HSM) may produces parts with substantially higher fatigue strength; increased subsurface micro-hardness and plastic deformation, mostly due to the ploughing of the round cutting tool edge associated with induced stresses, and can have far more superior surface properties than surfaces generated by grinding and polishing. Cutting edge roundness may induce stress and tempera...

متن کامل

Effects of Friction and Cutting Speed on Cutting Force

Observations are made regarding the influence of cutting speed and friction on cutting force by way of finite element modeling. Simulations are validated by comparison of cutting forces and chip morphologies for the Al6061-T6. Analysis of cutting forces over a wide range of cutting conditions suggests an important role of the secondary shear zone in the decrease of cutting force as a function o...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2010