Permeability, Solubility, and Interaction of Hydrogen in Polymers- An Assessment of Materials for Hydrogen Transport

نویسنده

  • M. C. Kane
چکیده

States Government nor any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. Fiber-reinforced polymer (FRP) piping has been identified as a leading candidate for use in a transport system for the Hydrogen Economy. Understanding the permeation and leakage of hydrogen through the candidate materials is vital to effective materials system selection or design and development of safe and efficient materials for this application. A survey of the literature showed that little data on hydrogen permeation are available and no mechanistically-based models to quantitatively predict permeation behavior have been developed. However, several qualitative trends in gaseous permeation have been identified and simple calculations have been performed to identify leakage rates for polymers of varying crystallinity. Additionally, no plausible mechanism was found for the degradation of polymeric materials in the presence of pure hydrogen. The absence of anticipated degradation is due to lack of interactions between hydrogen and FRP and very low solubility coefficients of hydrogen in polymeric materials. Recommendations are made to address research and testing needs to support successful materials development and use of FRP materials for hydrogen transport and distribution.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Determination of thermodynamic parameters of hydrogen permeation of palladium membrane for considering the effect of stainless steel support

A palladium composite membrane was prepared by electroless plating on oxidized porous stainless steel support (ox-PSS). Hydrogen permeation flux through this composite membrane was measured in the temperature range of 574-674K and the pressure difference of two sides of membrane up to 90kPa. A simplified resistance model was employed to analyze the permeation behavior of hydrogen through Pd/ox-...

متن کامل

Fundamental Structure/Property Studies of Gas Separation Membrane Polymers

Work in 2012-2013 focused on studying gas permeability, diffusivity and solubility of polyimides and thermally rearranged (TR) polymers based on 3,3’-dihydroxy-4,4’diaminobiphenyl (HAB) and 2,2’-bis-(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA). To determine the effect of temperature on gas sorption, we studied H2 sorption in the HAB-6FDA polyimide and 3 partially converted HAB-6FD...

متن کامل

Solubility of Hydrogen Sulfid and Sulfur Dioxide in Triethylen Glycol, Tetra Ethylene Clycol and Diethanol (TECHNICAL NOTE). AMINE SOLUTION

Natural gas sweetening is an important process which is used for treatment of sour gases. The measurement of solubility is also considered in most sweetening processes such as that of Townsend process. Therefore, experimental measurements would be helpful to determine the equilibrium data under actual equilibrium conditions for the gas treatment plants. In this research solubility of hydrogen s...

متن کامل

Comparative investigation on the correction factors of hydrogen permeability on CNTs-Mixed matrix membrane

This paper discusses different important gas permeation models such as “Maxwell”, “Bruggeman”, “Lewis-Neilson”, and “Pal” models to predict “Mixed Matrix Membranes” (MMMs) performance. The main parameter considered and discussed is the permeability of Hydrogen on Carbon Nanotubes (CNTs)-MMM. For evaluation of the theoretical models, experimental data of permeability for H2 were compa...

متن کامل

Comparative investigation on the correction factors of hydrogen permeability on CNTs-Mixed matrix membrane

This paper discusses different important gas permeation models such as “Maxwell”, “Bruggeman”, “Lewis-Neilson”, and “Pal” models to predict “Mixed Matrix Membranes” (MMMs) performance. The main parameter considered and discussed is the permeability of Hydrogen on Carbon Nanotubes (CNTs)-MMM. For evaluation of the theoretical models, experimental data of permeability for H2 were compa...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2008