Analysis of steel and its alloys using the GB / T 20125 - 2006 standard and an Agilent 5100 ICP - OES in dual view mode Application note
نویسنده
چکیده
Steel manufacturers conduct quality control testing for a range of metals and trace elements to ensure the grade and performance of their final product. The Standardization Administration of China uses their GB/T 20125-2006 standard “Low-alloy steel – Determination of multi-element contents – Inductively coupled plasma atomic emission spectrometric method” to control the quality of manufactured steel products.
منابع مشابه
ICP-OES Analysis fo FeCr Alloys Prepared by Sodium Peroxide Fusion
The ferrochrome alloy is produced by electric arc melting of the mineral chromite (FeCr2O4). It is largely used for the production of stainless steels. Increasing the amount of chromium content in the steel allows for increased corrosion and oxidation resistance. Other alloying elements, such as nickel (Ni) or molybdenum (Mo), aid in making the steel more passive and increasing its stainless pr...
متن کاملDirect analysis of milk using the Agilent 4100 Microwave Plasma - Atomic Emission Spectrometer ( MP - AES ) Application note
Milk samples, which had been diluted in aqueous solutions containing 10% v/v of a mixture of tertiary amines at pH 8.0, were analyzed using an Agilent 4100 MP-AES. Al, Cr, Cu, Fe, Mg, Mn and Zn were determined in a non-fat liquid milk sample and in a standard reference material of non-fat milk powder. Sample introduction via a OneNeb nebulizer, which incorporates the Flow Blurring technology, a...
متن کاملUnmatched Removal of Spectral Interferences in ICP-MS Using the Agilent Octopole Reaction System with Helium Collision Mode Application
Many routine laboratories have adopted ICP-MS as their primary technique for metals analysis due to its simple operation as a multi-element analyzer. However, despite its higher performance for the targeted removal of specific interferences, collision/reaction cell (CRC) ICP-MS remains relatively understudied in terms of its multielement capability. This work demonstrates that the Agilent 7500c...
متن کاملUsing Scrap Tires in EAFs as a Substitute for Carbon
EAF plants normally consume coal and coke as reactants, alloying elements, or fuel. The price of these materials varies from € 0.20-0.35/kg. This is while nearly 10 million pieces of tires are annually discarded in Iran. The present study shows that scrap tires can be used as a substitute for coal and coke in EAF plants. Thirteen grades of steel including low, medium, and high carbon steels as ...
متن کاملRoHS/ELV Directives - Measurement of Heavy Metals Using ICP-MS Application
This application note describes a robust analytical method for the determination of heavy metals and substances regulated by the EU Restriction of Hazardous Substances/End of Life Vehicles (RoHS/ELV) directives. Based on the experience of Nihon Environmental Services Co., Ltd in Japan using an Agilent Technologies 7500c ORS (Octopole Reaction System) collision/reaction cell ICP-MS, this note su...
متن کامل