Peel resistance of adhesive joints with elastomer–carbon black composite as surface sensing membranes
نویسندگان
چکیده
The peel resistance of four adhesives (“J-B Weld” by J-B Weld (adhesive A) , 3M Scotch-Weld DP 125 Gray (adhesive B), Loctite PL Premium (3x) Construction Adhesive (adhesive C), and Henkel Hysol EA9394 (adhesive D)) is investigated for their bonding performance of a styreneethylene/butylene-styrene– carbon black (SEBS-CB) composite membrane used in structural health monitoring (SHM) applications. Tests are performed on membrane samples bonded on four common structural materials, namely aluminium, steel, concrete, and fiberglass, to obtain the peel resistance of adhesives. Results show that adhesive B has the highest strength for aluminium, steel, and fiberglass substrates, and that adhesive C has the highest strength for the concrete substrate. The performance is also evaluated versus adhesive cost, a critical variable in SHM applications. Here, adhesive C performed best for all substrates. Lastly, membrane residuals resulting from the peel tests are compared. Tests show that Adhesive B resulted in the highest residual percentage for aluminium, while adhesive C performed better for all other substrates. However, membrane residuals for adhesive C do not show a positive correlation with the peel resistance.
منابع مشابه
Semi Analytical Transient Dynamic Analysis of Composite Adhesive Single-lap Joints
A novel semi analytical method is developed for transient analysis of single-lap adhesive joints with laminated composite adherends subjected to dynamical loads. The presented approach has the capability of choosing arbitrary loadings and boundary conditions. In this model, adherends are assumed to be orthotropic plates that pursuant to the classical lamination theory. Stacking sequences can be...
متن کاملAnalytical Solution of Stress Field in Adhesively Bonded Composite Single-Lap Joints Under Mechanical Loadings
In this paper, considering an adhesively bonded composite single-lap joint, a novel approach is presented to predict the peel and shear stress distributions of the adhesive layer for an ASTM standard test sample. In current method, the equilibrium equations are derived using the energy method and based on the Timoshenko’s beam theory. Two solution procedures then are discussed, one of which rep...
متن کاملDevelopment of a Conductive / Adhesive Rubber Ink for Flexible Electrode
Extended Abstract Direct ink writing or printing techniques offer an attractive alternative for satisfying the demanding design rules and form factors required for metallic electrodes in printed electronic and optoelectronic devices. Traditionally, the micro-fabrication of conductive patterns by electroplating and etching processes accompanied by lithography is time-consuming and expensive proc...
متن کاملUltrastretchable Strain Sensors Using Carbon Black-Filled Elastomer Composites and Comparison of Capacitive Versus Resistive Sensors
DOI: 10.1002/admt.201700284 system.[11] Researchers have developed highly stretchable strain sensors made of compliant elastomers and various conductive materials, such as silver nanowire,[12] carbon nanotube (CNT),[13–18] carbon grease,[19] graphene,[20] graphite,[21] laser-carbonized polyimide,[22] conductive acrylic elastomer,[10] liquid metal,[23,24] ionic liquid,[25–27] and conductive fabr...
متن کاملEffect of Carbon Black Content on Curing Behavior of Polysulfide Coatings
Polysulfide is well known elastomer for use in aerospace applications due to providing flexible coating and chemically resistant sealants. In this work, the effects of carbon black content on curing behavior of polysulfide elastomer were investigated and Rheological properties for samples with different filler content 15, 20 and 25 phr were evaluated by rheometric mechanical spectrometer RMS. A...
متن کامل