Fractions Recovery Recovery collection with the Agilent 1100 Series purification system
نویسندگان
چکیده
In this Application Note we show three system configurations for recovery collection with the Agilent 1100 Series purification system. One configuration uses a 12-position/13-port valve 3 in the waste line of the fraction collector, which offers up to twelve recovery locations. Another possibility is to use a third-party fraction collector, controlled by the ChemStation through external contacts using a BCD board. The most sophisticated approach, however, is to use a dedicated Agilent 1100 Series fraction collector, which gives complete recovery location tracking with the graphical user interface of the software or in the reports. Udo Huber Adam Woodhouse
منابع مشابه
Performance of the Agilent 1100 Series preparative pump at low flow rates Technical Note
The Agilent 1100 Series preparative pump1,2 forms the basis of the Agilent 1100 Series purification system. It is an isocratic high performance pump with dual piston design for a flow rate range of 5–100 ml/min at 400 bar. To form a gradient system two pumps have to be combined. The extremely small delay volume (figure 1) of the mixer and the attached capillaries, about 0.7 ml, allows fast and ...
متن کاملAutomated Purification Software for Agilent OpenLAB CDS
Agilent 1260 Infinity LC and LC/MS purification systems offer flexible and easy‐to‐use solutions for purification of microgram to gram quantities of samples, with maximum levels of recovery and purity. Using combined or dedicated analytical and preparative‐scale systems configured to meet the throughput demands of your laboratory, the Agilent Automated Purification Software automates the transf...
متن کاملPerformance of high-throughput, high- resolution LC MALDI spotting as a tool for protein identification The Agilent 1100 Series microfraction collection/ spotting system as the missing link between separation and detection in MALDI MS
Combining MALDI MS/MS and nanoflow HPLC has the advantage that MS and MS/MS fragmentation is independent from separation. Therefore, selection of precursor ions from complex samples and in depth analysis of fragment ions is possible without any time constraint. To avoid tedious manual spotting procedures with low reproducibility we used the Agilent 1100 Series microfraction collection/spotting ...
متن کاملLeaching Recovery of Zinc, Cobalt and Manganese from Zinc Purification Residue
This paper reports on the recovery of zinc, cobalt and manganese by two-step leaching of zinc-plants purification residue with sulfuric acid. The residue, hot filter press cake (HFC), contains 14 % ZnO, 4.8 % Co3O4 and 22.9 % MnO. Effects of different parameters are determined and used to optimize the process. With acid to hot filter press cake (HFC) stoichiometry of 0.85, acid concentration of...
متن کاملTechno-Economic Assessment of Heat Recovery in Series Condensers Arrangement: Hot and Humid Regions
A direct expansion (DX) HVAC system is an efficient way to supply fresh and dehumidified air to a built environment. To improve the efficiency of a conventional DX system in hot and humid regions, fresh air dehumidification and conditioning systems with energy recovery measures are the key equipment to reach such a goal. To achieve this goal an integrated system is proposed. The integrated syst...
متن کامل