Adhesive/ Adherend Interla Yer Property Measurement by Acoustic Microscopy
نویسندگان
چکیده
Adhesive bonding of aluminum holds some possible advantages over the traditional methods of construction in the aerospace industry. However, there is uncertainty about the mechanism of adhesive bonding and the changes occurring during environmental attack which reduce the bond strength. An improved understanding will aid in the development of better techniques for non-destructive testing (NDT) of joints by determining what properties should be measured and willlead to the development of better adhesive systems.
منابع مشابه
Effect of Adhesive Stiffness and Thickness on Stress Distributions in Structural Finger Joints
Environmental, political. and socioeconomic actions over the past several years have resulted in a decreased wood supply at a time when there is an increased demand for forest products. This combination of increased demand and decreased supply has forced more emphasis on engineered wood products, a varied category usually connected with adhesively-bonded end joints, of which the most common typ...
متن کاملInterfacial Fracture Toughness Measurement and Improvement for Composite/metal Interfaces
Adhesive bonding is enlarging its application range as a practical method for the joining of dissimilar materials in automotives, aircrafts, microelectronics and medical devices industries replacing conventional joining techniques such as welding, bolting and riveting [1-5]. Especially for joining of fiber-reinforced polymer (FRP) composites to other structural materials such as metal, traditio...
متن کاملMonitoring of Disbonding in Bonded Composite Joints Using Cfbg Sensors Embedded within the Adhesive Bondline
Chirped fibre Bragg grating (CFBG) sensors have been embedded within the adhesive bondline of single-lap bonded composite joints, fabricated using a transparent glass fibre reinforced plastic (GFRP) adherend bonded to a carbon fibre reinforced plastic (CFRP) adherend. During fatigue cycling, disbonds initiated adjacent to the cut ends of one, or both, of the adherends and the disbonds propagate...
متن کاملDamage Evolution in Composite Bonded Joints under Fatigue Loading
The fatigue behaviour of single lap bonded joints under fatigue loading was already investigated and a suitable life prediction model was presented and validated [1-2]. The model is based on the actual damage evolution under fatigue load: a crack initiation followed by its propagation up to a critical length [2, 3]. In the present paper the evolution of fatigue damage in single lap joints is ex...
متن کاملEffect of Adherend Shape on Stress Concentration Reduction of Adhesively Bonded Single Lap Joint
Article history: Received: 03.10.2014. Received in revised form: 19.12.2014. Accepted: 30.12.2014. In this work, the effect of adherend shape on the tensile strength of adhesively bonded single lap aluminum structures joint was numerically studied using three dimensional finite element models. Six joint models were investigated. In this paper, a static finite element analysis was performed in A...
متن کامل