Large-scale synthesis of Cu2SnS3 and Cu(1.8)S hierarchical microspheres as efficient counter electrode materials for quantum dot sensitized solar cells.

نویسندگان

  • Jun Xu
  • Xia Yang
  • Tai-Lun Wong
  • Chun-Sing Lee
چکیده

Exploration of new catalytic semiconductors with novel structures as counter electrode materials is a promising approach to improve performances of quantum dot sensitized solar cells (QDSSCs). In this work, nearly mono-disperse tetragonal Cu(2)SnS(3) (CTS) and rhombohedral Cu(1.8)S hierarchical microspheres with nanometer-to-micrometer dimensions have been synthesized respectively via a simple solvothermal approach. These microspheres are also demonstrated as efficient counter electrode materials in solar cells using ZnO/ZnSe/CdSe nanocables as photoanode and polysulfide (S(n)(2-)/S(2-)) solution as electrolyte. While copper sulfide is regarded as one of the most effective counter electrode materials in QDSSCs, we demonstrate the CTS microspheres to show higher electrocatalytic activity for the reduction of polysulfide electrolyte than the Cu(1.8)S microspheres. This contributes to obvious enhancement of photocurrent density (J(SC)) and fill factor (FF). Power conversion efficiency (PCE) is significantly enhanced from 0.25% for the cell using a pure FTO (SnO(2):F) glass as counter electrode, to 3.65 and 4.06% for the cells using counter electrodes of FTO glasses coated respectively with Cu(1.8)S and CTS microspheres.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

SILAR Sensitization as an Effective Method for Making Efficient Quantum Dot Sensitized Solar Cells

CdSe quantum dots were in situ deposited on various structures of TiO2 photoanode by successive ionic layer adsorption and reaction (SILAR). Various sensitized TiO2 structures were integrated as a photoanode in order to make quantum dot sensitized solar cells. High power conversion efficiency was obtained; 2.89 % (Voc=524 mV, Jsc=9.78 mA/cm2, FF=0.56) for the cells that sensitized by SILAR meth...

متن کامل

Recent development of carbon nanotubes materials as counter electrode for dye-sensitized solar cells

Dye-sensitized solar cells present promising low-cost alternatives to the conventional Silicon (Si)-based solar cells. The counter electrode  generally consists of Pt deposited onto FTO plate. Since Pt is rare and expensive metal, nanostructured carbonaceous materials have been widely investigated as a promising alternative to replace it. Carbon nanotubes  have shown significant properties such...

متن کامل

One-Pot controlled synthesis of spongelike CuInS(2) microspheres for efficient counter electrode with graphene assistance in dye-sensitized solar cells.

Spongelike CuInS2 3D microspheres were synthesized through a solvothermal method employing CuCl, InCl3, and thiourea as Cu, In, and S sources, respectively, and PVP as surfactant. The as-prepared products have regular spherical shapes with diameters of 0.8-3.7 μm, the spheres consisted of small nanosheets, which are composed of small nanoparticles. As an important solar cell material, its photo...

متن کامل

Restricted charge recombination process in PbS quantum dot sensitized solar cells by different coating cycles of ZnS films

The relatively low power conversion efficiency (PCE) of quantum dot sensitized solar cells (QDSSCs) is attributed to charge recombination at the interfaces. Charge recombination process could be suppressed by coating the QD layer with a wide band gap semiconductor such as ZnS, which acts as a blocking layer between the QDs and hole transport material (HTM). In present study, to improve PCE of P...

متن کامل

Design and development of highly efficient PbS quantum dot-sensitized solar cells working in an aqueous polysulfide electrolyte.

PbS quantum dot-sensitized solar cells (QDSCs) with a photovoltaic conversion efficiency (η) of 5.73% have been fabricated by applying Au/CuS/FTO as a counter electrode (CE), post-annealing the deposited PbS QDs, and introducing the bilayered TiO2 nanostructure as a photoanode.

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Nanoscale

دوره 4 20  شماره 

صفحات  -

تاریخ انتشار 2012