Design and Development of Labview Based Steering Wheel Angle Sensor System
نویسندگان
چکیده
Conventional angle sensors can measure only 360°,but passenger car steering wheel turns through +/-720 (a total of 4 complete turns). In this paper we describe iGMR based steering wheel angle sensor implementation which can be used as a rotation sensor to measure +/720°. KeywordSteering Wheel Angle Sensor, IGMR, Angle Sensor, GMR.
منابع مشابه
Sensor-Actuator Based Smart Yoke for a Rack and Pinion Steering System
The controlling behaviour of a vehicle is influenced by the performance of its steering system. The steering system consists of steering wheel, steering column, rack and pinion, steering gearbox, and a linkage system. The vehicle is controlled by the behaviour of the steering gear with the spring loaded rack and pinion. This spring loading arrangement consists of yoke nut, spring, and plunger. ...
متن کاملModeling and Optimal Control of 4 Wheel Steering Vehicle Using LQR and its Comparison with 2 Wheel Steering Vehicle
In this paper, kinetic and kinematic modeling of a 4 wheel steering vehicle is done and its movement is controlled in an optimal way using Linear Quadratic Regulator (LQR). The results are compared with the same control of two-wheel steering case and the advantages are analyzed. In 4 wheel steering vehicles which are nowadays more applicable the number of controlling actuators are more than the...
متن کاملMathematical Modeling of Ultrasonic Phased Array for Obstacle Location for Visually Impaired
Ultrasonic beam steering characteristics of phased array transducer is mathematically modeled to detect and locate the obstacle for the visually impaired. The main purpose of Beam steering is to steer the beam at a given angle to investigate the object along the beam direction. The effects of various transducer parameters on beam steering properties are studied and optimal phased array is simul...
متن کاملHaptic Steering by Wire based on High Gain GPI Observer - Controller techniques
A steering by wired haptic system based on disturbance rejection control techniques is presented. High gain Generalized Proportional Integral (GPI) observers are considered for the estimation of tire and steering wheel dynamic disturbances. These disturbances are on line canceled to ensure efficient tracking between the commanded steering wheel angle and the tire orientation angle. The estimate...
متن کاملTorque Overlay Based Robust Steering Wheel Angle Control for Lateral Control Using Backstepping Design
We propose a torque overlay based robust steering wheel angle control of electric power steering (EPS) for lateral control using backstepping design. The main contribution of this paper is that the proposed method is designed based on torque overlay and that the global uniform ultimate boundedness of the steering wheel angle tracking error is guaranteed using only steering wheel angle feedback ...
متن کامل