Cr:LiSrAlF(6) regenerative amplifier.

نویسندگان

  • M D Perry
  • D Strickland
  • T Ditmire
  • F G Patterson
چکیده

The design and performance of a flash-lamp-pumped regenerative amplifier that utilizes the new laser material Cr:LiSrAlF(6) is described. The device can be used for tunable and/or short-pulse amplification to the 10-mJ level at a repetition rate of 10 Hz. Using chirped-pulse amplification, we have achieved 8-mJ pulses with a duration of 150 fs.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Argon-ion-pumped and diode-pumped all-solid-state femtosecond Cr:LiSrAlF(6) regenerative amplifiers.

A tunable femtosecond solid-state amplifier system that uses only 3 W of 488-nm argon-ion pump power has been demonstrated to deliver microjoule pulses at repetition rates up to 20 kHz, with a maximum pulse energy of 14 mu;J obtained at 5 kHz. An all-solid-state, tunable, diode-pumped Cr:LiSrAlF(6) regenerative amplifier has been demonstrated, for the first time to our knowledge, that amplifies...

متن کامل

Terawatt Cr:LiSrAIF(6) laser system.

We have developed a compact flash-lamp-pumped Cr:LiSrAlF(6) (Cr:LiSAF) laser system capable of producing peak powers in excess of 1 TW. Chirped-pulse amplification in a Cr:LiSAF regenerative amplifier produces 8-mJ pulses at a 5-Hz repetition rate. Further amplification in Cr:LiSAF yields recompressed pulse energies of 150 mJ and a pulse duration <135 fs at a 0.5-Hz repetition rate.

متن کامل

Amplification of femtosecond pulses to 1 J in Cr:LiSrAlF(6).

We have developed a large-aperture, flash-lamp-pumped Cr:LiSrAlF(6) (Cr:LiSAF) amplifier for use in a femtosecond chirped-pulse amplifier system. Optimum design of the 19-mm-diameter amplifier results in a single-pass gain of 5 with good beam quality. This amplifier produces 1.05-J pulses after compression, with a width of 125 fs at a repetition rate of 0.05 Hz.

متن کامل

Regenerative amplification of picosecond pulses in Nd:YAG at repetition rates in the 100-kHz range

An all-acousto-optically switched picosecond Nd:YAG regenerative amplifier has been developed for operation at pulse repetition rates in the 20-100-kHz range. The amplifier produces stable 50-ps pulses at 1064 nm in a TEMOO transverse mode with pulse energies of the order of 20-100 AJ. Generation of the second harmonic at 532 nm in KTP crystal results in conversion efficiencies greater than 40%...

متن کامل

Directly diode-pumped Yb3+:SrY4(SiO4)3O regenerative amplifier.

We report a regenerative amplifier based on an Yb-doped apatite crystal: Yb3+:SrY4(SiO4)3O (Yb:SYS). We obtained 420-fs pulses at a central wavelength of 1066 nm with an energy of 100 microJ at 300 Hz after compression. To the best of our knowledge, this system is the first regenerative amplifier based on an Yb:SYS crystal and provides duration among the shortest ones generated by a directly di...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Optics letters

دوره 17 8  شماره 

صفحات  -

تاریخ انتشار 1992