Curing studies of unsaturated polyester resin used in FRP products

نویسندگان

  • Sachin Waigaonkar
  • B J C Babu
  • Amit Rajput
چکیده

Fiber reinforced plastics (FRP) products being strong and light in weight, find extensive applications in automobiles, marine, structural and household components. Unsaturated polyester (UP) resin is a principle binder material used in FRP products. Curing of UP resin is a key for successful FRP processing. Gel time (tgel) and peak exothermic temperature (θpeak) are critical measures of curing of resin. tgel indicates commencement of polymer cross-linking (setting) while θpeak controls shrinkage and cracking of polymer. This paper aims to predict the tgel and θpeak during cure of UP resin. The weight percent of methyl ethyl ketone peroxide (MEKP) as catalyst, cobalt octoate (Coct) as an accelerator, calcium carbonate (CaCO3) as filler and glass fibers as reinforcements are used as process variables. The variations in tgel and θpeak are approximated by regression equations. Strong interactions are found between the process variables. The process optimization is made to achieve a desired combination of tgel and θpeak within the regime of experimentation. Confirmatory experiments are performed to validate the predicted results.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

A New Method of Brain Plastination

Introduction: Plastination is a unique technique for preservation of biological specimens used for teaching purposes. The protocol of flexible sheet plastination includes fixation, slicing, dehydration, force impregnation, casting, and curing (Hajian, Rabiei, Fatollahpour & Esfandiary, 2008). The procedure is done by using P87 flexible unsaturated polyester resin and provides heavy, gross, frag...

متن کامل

Evaluation of Drilling Performance of Unsaturated Polyester Resin

Unsaturated polyester resin (UPR) has the resistance against boiled water, acid and alkali, and hence, is widely used in corrosive environment and elsewhere, although fracture strength of polymeric materials is generally low relative to metals and ceramics. Despite the fact that polymer components are mostly produced near-net-shape, machining, particularly drilling, is often required to prepare...

متن کامل

Mechanical Properties of Unsaturated Polyester Resin

Mechanical behaviour of unsaturated polyester resin used for the composite materials has been studied to determine various important parameters, such as tensile and compressive, single edge-notch tensile fracture toughness, flexural properties and fracture energy. Fracture toughness, KIC, and fracture energy, GIC, obtained for the polyester resin lie between the typical values for epoxy resins ...

متن کامل

Occupational contact allergy to components of polyester resin systems.

BACKGROUND Allergic contact dermatitis caused by polyester resin is considered to be rare. OBJECTIVES To describe 11 new patients diagnosed with occupational contact allergy to components of polyester resin systems in 1994-2009. METHODS Data on occupations, patch test results, symptoms and exposure to polyester products were retrieved from patient files, covering 1994 to February 2015. RE...

متن کامل

Analysis and aging of unsaturated polyester resins in contemporary art installations by NMR spectroscopy.

Two original art installations constructed from unsaturated polyester resins (UPR) and four different reference UPR products (before and after UVB aging) were analyzed by high-resolution 1D and 2D nuclear magnetic resonance (NMR) spectroscopy. Breaking strain studies were also conducted for the four UPR model products before and after different aging procedures (moisture, UVB exposure, melt/fre...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011