Integrated Daylight Harvesting and Occupancy Detection Using Digital Imaging
نویسندگان
چکیده
This paper describes a proof-of-concept implementation that uses a high dynamic range CMOS video camera to integrate daylight harvesting and occupancy sensing functionalities. It has been demonstrated that the proposed concept not only circumvents several drawbacks of conventional lighting control sensors, but also offers functionalities that are not currently achievable by these sensors. The prototype involves three algorithms, daylight estimation, occupancy detection and lighting control. The calibrated system directly estimates luminance from digital images of the occupied room for use in the daylight estimation algorithm. A novel occupancy detection algorithm involving color processing in YCC space has been developed. Our lighting control algorithm is based on the least squares technique. Results of a daylong pilot test show that the system i) can meet different target light-level requirements for different task areas within the field-of-view of the sensor, ii) is unaffected by direct sunlight or a direct view of a light source, iii) detects very small movements within the room, and iv) allows real-time energy monitoring and performance analysis. A discussion of the drawbacks of the current prototype is included along with the technological challenges that will be addressed in the next phase of our research.
منابع مشابه
Application of RELUX Software in Simulation and Analysis of Energy Efficient Lighting Scheme
Designing a building with maximum utilization of daylight and use of energy efficient luminaires will reduce the cost of energy use. In the present study, by means of computer simulations using RELUX software, the interaction between natural and artificial light and the related illumination conditions expected in a commercial office building in Mumbai, India have been simulated and analysed. In...
متن کاملAgreement of Bitewing and Digital Panoramic Radiographies in the Detection of Proximal Caries
Background & Aims: Conventional radiography is used for the diagnosis of problems such as dental caries and failure in root canal therapy. The diagnosis accuracy of conventional radiography is acceptable in the evaluation of anatomical and pathological structures. However, it seems that by using digital radiography we can obtain more information in this field. The aim of this study is to compar...
متن کاملEnergy and visual comfort analysis of lighting and daylight control strategies
Shading systems have the potential to reduce energy consumption of electric lighting and improve visual comfort. Various automated control systems of shading device and electric lighting have been widely used. However, existing lighting and shading systems typically operate independently, i.e., information is not shared, and thus system performance is not optimal. Therefore, integrated control ...
متن کاملDesign and Manipulation 3D Imaging System by using Photodiode Grid
Introduction: Radiation imaging is one of the applicable methods in diagnostic medicine and nondestructive testing for industrial applications. In nondestructive 3D imaging, in addition to the radiation source, there is a requirement for a suitable detection system, data acquisition system, mechanical sections for moving objects, reconstruction algorithm and finally a computer for processing an...
متن کاملComparison of cone beam computed tomography and digital radiography in detection of pulpal exposure in external cervical root resorption
Background and Aims: Pulpal exposures originated from the external cervical root resorptions have major effects on the treatment and prognosis. Therefore, the aim of this study was performed to compare the two different imaging systems-digital radiography with PSP (Photostimulable Phosphor) sensor in three horizontal different views and CBCT (cone beam computed tomography) images to assess the ...
متن کامل