Order parameters and orientation distributions of solution adsorbed and microcontact printed cytochrome c protein films on glass and ITO.
نویسندگان
چکیده
The structure of solution adsorbed and microcontact printed (muCP) cytochrome c (cyt c) films on glass and indium tin oxide (ITO) was investigated using attenuated total reflectance (ATR) and total internal reflectance fluorescence (TIRF) spectroscopies to determine the orientation of the heme groups in the films. The second and fourth order parameters of the heme as well as information on the angle between the absorption and emission dipoles of the heme, gamma, were experimentally determined. The order parameters of the heme are related to the order parameters of the protein molecule using the known angle between the heme plane and the electrostatic dipole moment of the cyt c protein. The effect of the surface roughness of the substrates (glass and ITO) was also taken into account quantitatively using AFM data. Physically possible order parameters were obtained for the heme group in both solution adsorbed and muCP films, but not for the electrostatic dipole moment of the protein. In addition, the experimental values of {cos2 gamma} for immobilized zinc-substituted cyt c are greater than the values of {cos2 gamma} determined in viscous solutions, which could be an indication that the environment of the heme groups changes upon adsorption. The electron transfer behavior of solution adsorbed and muCP films on ITO, determined using electrochemical methods, is compared to their orientation distribution and surface coverage as determined by spectroscopic methods.
منابع مشابه
Determination of anisotropic optical constants and surface coverage of molecular films using polarized visible ATR spectroscopy. Application to adsorbed cytochrome c films.
This article describes a method to determine the anisotropic optical constants and surface coverage of molecular films using polarized attenuated total reflectance (ATR) absorbance measurements. We have extended the transfer-matrix formalism to describe birefringent and dichroic films in ATR geometries and have combined it with an iterative numerical procedure to determine the anisotropic value...
متن کاملA Study of ZnO Buffer Layer Effect on Physical Properties of ITO Thin Films Deposited on Different Substrates
The improvement of the physical properties of Indium Tin Oxide (ITO) layers is quite advantageous in photovoltaic applications. In this study the ITO film is deposited by RF sputtering onto p-type crystalline silicon (c-Si) with (100) orientation, multicrystalline silicon (mc-Si), and glass substrates coated with ZnO and annealed in vacuum furnace at 400°C. Electrical, optical, structural a...
متن کاملPreparation and proposed mechanism of ZnO Nanostructure Thin Film on Glass with Highest c-axis Orientation
In this paper, ZnO thin film is deposited on slide glass substrate using the sol-gel process. Presenting well-defined orientation of ZnO thin films Nanostructure were obtained by dip coating of zinc acetate dihydrate, monoethanolamine (MEA), de-ionized water and isopropanol alcohol. The annealed ZnO thin films were transparent ca 85-90% in visible range with an absorption edges at about 375 nm....
متن کاملStructural Properties of Post Annealed ITO Thin Films at Different Temperatures
Indium tin oxide (ITO) thin films were deposited on glass substrates by RF sputtering using an ITO ceramic target (In2O3-SnO2, 90-10 wt. %). After deposition, samples were annealed at different temperatures in vacuum furnace. The post vacuum annealing effects on the structural, optical and electrical properties of ITO films were investigated. Polycrystalline...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- The journal of physical chemistry. B
دوره 110 13 شماره
صفحات -
تاریخ انتشار 2006