Propeller blade stress estimates using lifting line theory
نویسندگان
چکیده
OPENPROP, an open-source computational tool for the design and analysis of propellers and horizontal-axis turbines, is extended to provide estimates of normal stresses in the blades for both onand off-design operating conditions. The numerical model is based on propeller lifting theory, and the present implementation of the code includes an analysis capability to estimate the off-design performance of the propeller or turbine and to make blade stress predictions. As an example, we present the design and performance of a two-bladed propeller. Experimental measurements of the propeller performance over a wide range of off-design operating conditions agree with performance predictions. Estimates of the blade stress are given for on-design and offdesign operating states of the propeller.
منابع مشابه
Design of a Low Reynolds Number Propulsion System for an Autonomous Underwater Vehicle
A methodology for the design of small autonomous underwater vehicle propulsion systems has been developed and applied to the Virginia Tech 690 AUV. The methodology is novel in that it incorporates fast design level codes capable of predicting the viscous effects of low Reynolds number flow that is experienced by small, slow turning propellers. The methodology consists of determining the minimum...
متن کاملA Numerical Vortex Approach to Aerodynamic Modeling of SUAV/VTOL Aircraft
A numerical lifting line method, coupled with a numerical blade element method, is presented as a low computational cost approach to modeling slipstream effects on a finite wing. This method uses a 3D vortex lifting law along with known 2D airfoil data to predict the lift distribution across a wing in the presence of a propeller slipstream. The results are of significant importance in the devel...
متن کاملPerformance Improvements of a Centrifugal Pump with Different Impellers using Polymer Additive
In this study, the performance of a centrifugal pump is investigated by adding polyacrylamide (PAM) polymer over the working fluid which is tap water in this case. PAM is a long chain polymer that leads to reduce the wall shear stress and drag in a turbulent fluid. Three different blade profiles including radial, straight backward and circular backward have been examined. For this purpose, a ce...
متن کاملOpenProp v2.3 theory document
OpenProp is an open-source code suite that can be used for the design, analysis, and fabrication of optimized propellers and horizontal-axis turbines. The numerical model is based on propeller lifting line theory, which is used in parametric design codes employed by the U.S. Navy as well as commercial designers. OpenProp is written in Matlab M-code, which is widely used in academia and industry...
متن کامل