Bearing fault detection using wavelet packet transform of induction motor stator current
نویسندگان
چکیده
Induction motor vibrations, caused by bearing defects, result in the modulation of the stator current. In this research, bearing defect is detected using the stator current analysis via Meyer wavelet in the wavelet packet structure, with energy comparison as the fault index. The advantage of this method is in the detection of incipient faults. The presented method is evaluated using experimental signals. Sets of data are gathered before and after using defective bearings. Compared to conventional methods, the superiority of the proposed method is shown in the success of fault detection. r 2006 Elsevier Ltd. All rights reserved.
منابع مشابه
Fault Detection in an Induction Motor Drive Using Discrete Wavelet Packet Transform
The aim of this study is to employ the wavelet technique for diagnosis of open-circuit and short circuit faults in the dc link of Induction motor drive. The symlet wavelet is selected as the wavelet base to perform stator current analysis during faults. In this method, the stator currents are used as an input to the system. The MATLAB software is used to process discreet wavelet transform (DWT)...
متن کاملOptimal Rotor Fault Detection in Induction Motor Using Particle-Swarm Optimization Optimized Neural Network
This study examined and presents an effective method for detection of failure of conductor bars in the winding of rotor of induction motor in low load conditions using neural networks of radial-base functions. The proposed method used Hilbert method to obtain the stator current signal push. The frequency and signal amplitude of the push stator were used as the input of the neural network and th...
متن کاملOnline Adaptive Continuous Wavelet Transform and Fuzzy Logic Based High Precision Fault Detection of Broken Rotor Bars for IM
This paper presents an intelligent fault detection based on adaptive continuous wavelet transform of broken rotor bars for Induction Motor (IM). Broken rotor bars, bearing decay, eccentricity, as motor faults appears as different frequencies in the stator current signals. The stator current and speed signals at deferent operation conditions obtained from the winding function are analysed throug...
متن کاملDetection of Bearing Faults in Mechanical Systems Using Motor Current Signature and Acoustic Signatures
Bearings are one of the critical components which fail often in rotating machinery during operation. Bearing faults in the mechanical system run by an induction motor causes change in its stator current spectrum. It is due to the fact that faults in the bearings cause variations of load irregularities in the magnetic field which in turn change the mutual and self inductance causing side bands a...
متن کاملStator Turn-to-Turn Fault Detection of Induction Motor by Non-Invasive Method Using Generalized Regression Neural Network
Condition monitoring and protection methods based on the analysis of the machine's current are widely used according to non-invasive characteristics of current transformers. It should be noted that, these sensors are installed by default in the machine control center. On the other hand, condition monitoring based on mathematical methods has been proposed in literature. However, they are model b...
متن کامل