Characterization and Pre-Concentration of Low-Grade Vanadium-Titanium Magnetite Ore
نویسندگان
چکیده
A large number of unexploited low-grade vanadium-titanium magnetite deposits have been found in the Chao-yang area of China in recent years. The reserves are estimated at more than 20 billion tons. A mineralogical study of raw sample indicated that it was a typical low-grade vanadium-titanium magnetite ore with weathering. Most of vanadium-titanium magnetite was replaced by martite and sphene, which would affect the recovery of valuable elements. The intergrowth relationship between vanadium-titanium magnetite and sphene was very complex, and the grain size of sphene was generally fine, and could not be completely liberated even by fine grinding, whereas the content of vanadium and titanium in sphene was higher than that in vanadium-titanium magnetite, resulting in vanadium-titanium magnetite concentrates with characteristics of high vanadium and titanium content. A magnetic separation process was investigated for the pre-concentration of low-grade vanadium-titanium magnetite ore. The results showed that 73.52% of feed ore were directly discarded for reducing the processing capacity of follow-up processing. A vanadium-titanium magnetite concentrate with 1.14% V2O5, 22.22% TiO2, 42.51% Fe and a rough concentrate of ilmenite with 16.05% TiO2, 20.77% Fe were obtained from low-grade vanadium-titanium magnetite ore which contains 0.050% V2O5, 1.67% TiO2 and 8.53% Fe.
منابع مشابه
-
Qara Aqaj titanium potential is one of the two major known titanium resources in Iran. The main host rocks of the ore body are ultramafics including wehrlite and lherzolite with minor clinopyroxenite. Qara Aqaj intrusion is composed mainly of ultramafic-mafic rocks, layered gabbro, diorite, microdiorite and some monzonite and alkali syenite. This intrusion has intruded the basement complex (amp...
متن کاملVanadium extraction from a magnetite ore using alkaline roasting and acid leaching processes: optimization of parameters by response surface methodology
In this work, thealkaline roasting and sulfuric acid leaching processes were employed to extract vanadium from the magnetite ore of Saghand mine in central Iran. The response surface methodology based on the central composite design model was applied to optimize the parameters involved in the processes. The studied roasting parameters were temperature (900-1100 °C), sodium carbonate percentage ...
متن کاملCharacterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation
In Sangan iron mine nearly two million tons of low-grade iron ore has been extracted and deposited in the mining site and currently no action is made on them. On the other hand, the mining site is located in the semi-arid region and wet processing has been restricted due to water shortage. In this research, the upgradation of Sangan low-grade iron ore from mine B has been performed by dry low-i...
متن کاملObservations on the lungs of vanadium workers.
Out of a total of 79 employees at a factory making vanadium pentoxide from magnetite ore 63 were investigated by respiratory questionnaire, chest radiography, and tests of ventilatory function. The findings were compared with a reference group of 63 men, matched for age (to within two years) and for smoking habit (to within five cigarettes daily) selected from workers at a magnetite ore mine. A...
متن کاملBeneficiation of a low-grade iron ore by combination of wet low-intensity magnetic separation and reverse flotation methods
Beneficiation of a low-grade iron ore was investigated by combination of the low-intensity magnetic separation and reverse flotation methods. The main constituents of the representative sample were 36.86% Fe, 8.1% FeO, 14.2% CaO, 13.6% SiO2, and 0.12% S based on the X-ray fluorescence, titration, and Leco analysis methods. The mineralogical studies by the X-ray diffraction, scanning electron mi...
متن کامل