Measurements of Balun and Gap Effects in a Dipole Antenna
نویسندگان
چکیده
In the present paper, design and analysis of a 2.4 GHz printed dipole antenna for wireless communication applications are presented. Measurements on return loss and radiation pattern of this antenna configuration are included in this investigation. The printed dipole is combined with the feeding structure of a microstrip via-hole balun and is fabricated on an FR-4 printed-circuit-board substrate. Two inevitable discontinuities are introduced by this antenna architecture in the form of right-angle bends in the microstrip feed line and in the dipole’s gap, respectively. The impact of mitering these bends in the reflection coefficient, resonance bandwidth and radiation pattern of antenna has been investigated by means of simulation and experiment.
منابع مشابه
Dual wideband printed dipole antenna with integrated balun
A printed dipole antenna with integrated balun is presented. The radiating structure is a two-element dipole with resonances at 900 and 1700 MHz, with the balun providing one extra resonance at each band. By co-designing the radiating element with a Marchand balun modified for dual-band operation, an antenna covering the cellular bands 824–960 and 1710–2170 MHz has been achieved. Measurements o...
متن کاملDual-Band Loop-Loaded Printed Dipole Antenna with a Wideband Microstrip Balun Structure
─ A novel loop-loaded printed dipole (LLPD) with a wideband balun structure is presented for aiming a dual-band antenna operation at 3.0/5.5 GHz bands. The proposed balun structure alone demonstrates VSWR<1.5 performance over a 3:1 bandwidth. As the loop elements placed on the antenna aperture provides dual-band operation with at least 15% impedance bandwidths, the wideband balun/feed allows fo...
متن کاملS Parameter Extraction Approach to the Reduction of Dipole
Modern test equipment used for antenna measurements, such as vector network analyzers (VNA), generally provide unbalanced coaxial measurement ports. This presents a problem when performing measurements on devices such as dipole antennas, which present a balanced input. A balun must be used to interface the dipole to the VNA. Since there is no straightforward way to include the balun in the stan...
متن کاملA Novel Circularly polarized dielectric resonator antenna with Branch-Line Coupler and Log-Periodic Balun
A new shaped circularly polarized dielectric resonator antenna (CP DRA) is studied with branch-line coupler and log-periodic balun for the GPS application. Since the coupler and balun are located under the DRA, it does not increase the footprint of the antenna, as a result the system is very compact. Two configurations are considered in this paper. In the first configuration, an external 50Ω lo...
متن کاملDual-band and Wideband Design of a Printed Dipole Antenna Integrated with Dual-band Balun
A dual-band printed dipole antenna with integrated balun feed is given in this paper. First, the fork-shaped slot is etched on the arms of the printed dipole antenna to achieve the dual-band operation with resonances at WLAN bands. The radiating element without balun is optimized and operates at 2.4 GHz (2180–2750MHz) and 5.2GHz (5040 MHz–5480MHz) where return loss is less than −10 dB. In order...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- IJCNS
دوره 3 شماره
صفحات -
تاریخ انتشار 2010