Optimal Design Considerations of a Bus Converter for On-Board Distributed Power Systems
نویسندگان
چکیده
The power supply systems, which require low-voltage / high-current output has been changing from the conventional centralized power system to a distributed power system. The distributed power system consists of a bus converter and POL. The most important factor is the system stability in bus architecture design. The overlap between the output impedance of a bus converter input impedance of POL causes system instability and has been an actual problem. By increasing the bus capacitor, the system stability can be easily improved. However, due to limited space on the system board, the increasing of bus capacitors is impractical. An urgent solution of this issue is strongly desired. This paper presents the output impedance design for on-board distributed power system by means of three control schemes of a bus converter. The output impedance peak of the bus converter and the input impedance of the POL are analyzed and then conformed experimentally for stability criterion. Furthermore, the design process of each control schemes for system stability is proposed.
منابع مشابه
Determination of Optimal Capacity and Location of Distributed Generations in Radial Distribution Systems using Krill Herd Algorithm
Abstract Reliability and active power loss are two fundamental parameters in the design and planning of distribution systems that have always attracted the attention of power distribution systems designers and engineers. The improvement of reliability and the reduction of power loss are investigated as the primary objective functions and voltage profile as the secondary objective function. A me...
متن کاملOptimal Coordinated Voltage Control in Distribution Networks in presence of Solar and Wind Power Plants Considering Uncertainties
Abstract: In the last decade, the amount of distributed generation connected to the distribution network is increasing. The presence of distributed generation resources in distribution systems has a great influence on its behavior and it is necessary to consider the impact of these resources on the distribution network design. In this study, Optimal Coordinated Voltage Control (OCVC) using wind...
متن کاملDistributed Generation Effects on Unbalanced Distribution Network Losses Considering Cost and Security Indices
Due to the increasing interest on renewable sources in recent years, the studies on integration of distributed generation to the power grid have rapidly increased. In order to minimize line losses of power systems, it is crucially important to define the size and location of local generation to be placed. Minimizing the losses in the system would bring two types of saving, in real life, one is ...
متن کاملDistributed Generation Effects on Unbalanced Distribution Network Losses Considering Cost and Security Indices
Due to the increasing interest on renewable sources in recent years, the studies on integration of distributed generation to the power grid have rapidly increased. In order to minimize line losses of power systems, it is crucially important to define the size and location of local generation to be placed. Minimizing the losses in the system would bring two types of saving, in real life, one is ...
متن کامل1 Benefits of the Dc Bus Converter in Distributed Power Architectures for Networking
The DC Bus Converter is a novel approach for isolated DC-DC converters that improves power delivery for next generation Networking & Communications systems. It will be shown through the use of innovative technologies and a novel control scheme, how a new, more optimal approach can be completed for isolated DC-DC converter designs in Networking & Communications end systems. The DC Bus Converter ...
متن کامل