A Design Rule for Inset-fed Rectangular Microstrip Patch Antenna
نویسندگان
چکیده
In our paper, an inset-fed microstrip patch antenna has been designed and the dependency of resonant frequency on the notch gap and the feed line geometry has been studied. Our study suggests that a narrower notch resulted in better impedance matching. A design rule has also been formulated and presented the performance of the proposed design. Key-Words: Inset-fed, microstrip antenna
منابع مشابه
A Capacitive Fed Microstrip Patch Antenna with Air Gap for Wideband Applications (RESEARCH NOTE)
In this paper a microstrip antenna on a suspended substrate with capacitive feed is presented. capacitive feed is created by a slot within the rectangular patch around the feed point. The proposed antenna exhibits a much higher impedance bandwidth of about 47% (S11 < −10 dB). Effects of key design parameters such as the air gap between the substrate and the ground plane, the gap width between r...
متن کاملDesign Investigation of Microstrip Patch and Half-Mode Substrate Integrated Waveguide Cavity Hybrid Antenna Arrays
In this paper two linear arrays including a linear 1×4 and a planar 2×2 of microstrip patch and half-mode substrate integrated waveguide (SIW) cavity hybrid antenna are introduced and investigated. These are simply implemented using low cost single layer printed circuit board (PCB) process. The array element consists of a rectangular microstrip patch with appropriate dimensions in the vicinity ...
متن کاملModified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications
A new multiple C-slotted microstrip patch antenna is proposed in the present study. A patch antenna is a wide-beam narrowband antenna. The microstrip patch antenna consists of a very thin metallic strip (patch) placed a small fraction of a wavelength above a ground plane. The patch can be designed in any possible shape and normally made of conducting materials such as copper or gold. This study...
متن کاملComparative Investigation of Half-mode SIW Cavity and Microstrip Hybrid Antenna Using Different Patch Shapes
A set of hybrid microstrip patch and semi-circular cavity antennas is introduced. The semi-circular cavity is implemented using Half-mode Substrate Integrated Waveguide (HMSIW) technique. Different shapes of patch include rectangular, semi-circular and equilateral triangular are excited using proximity effect by the circular SIW cavity at its TM010 mode of operation. The whole structures have b...
متن کاملDesign of Microstrip Patch Antenna by Introducing Defected Ground Structure
This paper proposes a novel Inset Feed Microstrip patch antenna with Z and F shape defect in ground plane. Initially simple inset feed rectangular Patch Antenna is designed and results are analyzed. Further this design is modified by etching Z and F shaped defect on ground plane. Defected Ground Structure is studied to enhance the performance parameters of microstrip patch antenna. Proposed ant...
متن کامل