Monitoring Gas Metal Arc Welding Process by Using Audible Sound Signal
نویسنده
چکیده
*Corr. Author’s Address: University of Ljubljana, Faculty of Mechanical Engineering, Askerceva cesta 6, 1000 Ljubljana, Slovenia, [email protected] 267 Monitoring Gas Metal Arc Welding Process by Using Audible Sound Signal Horvat, J. Prezelj, J. Polajnar, I. Čudina, M. Jožef Horvat1 Jurij Prezelj2 Ivan Polajnar2 Mirko Čudina2,* 1 University of Ljubljana, College of Health Studies, Slovenia 2 University of Ljubljana, Faculty of Mechanical Engineering, Slovenia
منابع مشابه
Optimization of pulesd current gas tungsten arc welding process parameters to attain maximum weld metal toughness ofAISI 316/A387 Gr.91 weld joints with Taguchi method
In this paper, maximum value of energy to break at Charpy impact test as a criterion of fracture toughness of AISI 316/A387 Gr.91 weld joints with ERNiCrMo-3 filler metal were obtained by optimization of pulesd current gas tungsten arc welding process parameters. The selected parameters were peak current, background current, frequency and on time percentage that were changed in three levels. Th...
متن کاملOptimization of pulesd current gas tungsten arc welding process parameters to attain maximum weld metal toughness ofAISI 316/A387 Gr.91 weld joints with Taguchi method
In this paper, maximum value of energy to break at Charpy impact test as a criterion of fracture toughness of AISI 316/A387 Gr.91 weld joints with ERNiCrMo-3 filler metal were obtained by optimization of pulesd current gas tungsten arc welding process parameters. The selected parameters were peak current, background current, frequency and on time percentage that were changed in three levels. Th...
متن کاملWelding of titanium base alloys by tungsten-gas pulse arc process (PCGTAW) and investigation of frequency effect on microstructure and mechanical properties
In this research, Ti-6Al-4V alloy sheet with a thickness of one millimeter with butt joint design was welded by tungsten-gas arc welding process using pulse current (PCGTAW) and using AMS 4954G filler metal. In this study, the effect of pulse system frequency on microstructure and mechanical properties was investigated by optical microscopy, Vickers hardness and tensile strength tests. In the n...
متن کاملWelding of titanium base alloys by tungsten-gas pulse arc process (PCGTAW) and investigation of frequency effect on microstructure and mechanical properties
In this research, Ti-6Al-4V alloy sheet with a thickness of one millimeter with butt joint design was welded by tungsten-gas arc welding process using pulse current (PCGTAW) and using AMS 4954G filler metal. In this study, the effect of pulse system frequency on microstructure and mechanical properties was investigated by optical microscopy, Vickers hardness and tensile strength tests. In the n...
متن کاملIntelligent monitoring and recognition of short-circuiting gas–metal arc welding process
This paper introduces an intelligent system for monitoring and recognition of process disturbances during short-circuiting gas–metal arc welding. It is based on the measured and statistically processed data of welding electrical parameters. A 12-dimensional array of process features is designed to describe various welding conditions and is employed as input vector of the intelligent system. Thr...
متن کامل