Modeling of Boron DeactivatiodActivation Kinetics During Ion Implant Annealing
نویسندگان
چکیده
AbsfrucfBoron Transient Enhanced Diffusion (TED) is characterized by enhanced tail diffusion coupled with an electrically inactive immobile peak associated with the clustering of boron in the presence of excess interstitials. A consistent model for process simulation has to account for the formation of a variety of agglomerates associated with the excess point defect concentrations following ion implantation. These include interstitial clusters (e.g., (311) defects), vacancy clusters and dopanthterstitial clusters (e.g., boron interstitial clusters). In addition to the chemical profiles (SIMS) it is essential to also predict electrical activation behavior. Hence, in this work we investigate models for boron deactivation and subsequent activation during annealing.
منابع مشابه
Boron Bromide as a Source Precursor for Low Energy Applications
The use of boron tri-bromide as a source precursor for low energy boron implantation is studied in this work. Details of gas delivery system, beam purity and running performance have been investigated for a 75keV molecular implant to give an equivalent boron energy of 5keV. The behavior of the Br during thermal processing is compared to that of F derived from a BF2 implant and is seen to be les...
متن کاملStudy of end of range loop interactions with B+ Pmplant damage using a boron doped diffusion layer
A boron doped epilayer was used to investigate the interaction between end of range dislocation loops (formed from Gef implantation) and excess point defects generated from a low dose 1 X 10’4/cm2 Bf implant into silicon. The boron doping spike was grown in by chemical vapor deposition at a depth of 8000 A below the surface. The intrinsic diffusivity of the boron in the doped epilayer was deter...
متن کاملUsing doping superlattices to study transient-enhanced diffusion of boron in regrown silicon
A boron-doped silicon superlattice consisting of three boron spikes separated by 1700 Å of undoped silicon has been grown by molecular beam epitaxy and used to study the evolution of point defects following an amorphizing implant of Si. After MBE growth, the wafer was implanted at 77 K with either 146 or 292 keV Si at a dose of 5�1015/cm2. These implants produced amorphous layer depths that coi...
متن کاملA simple continuum model for boron clustering based on atomistic calculations
Boron exhibits anomalous diffusion during the initial phases of ion implant annealing. Boron transient enhanced diffusion is characterized by enhanced tail diffusion coupled with an electrically inactive immobile peak. The immobile peak is due to clustering of boron in the presence of excess interstitials which also enhance boron diffusion in the tail region. We present a simple model for the f...
متن کاملComplex boron redistribution kinetics in strongly doped polycrystallinesilicon/nitrogendopedsilicon thin bilayers
We have investigated the complex behaviour of boron (B) redistribution process via silicon thin bi-layers interface. It concerns the instantaneous kinetics of B transfer, trapping, clustering and segregation during the thermal B activation annealing. The used silicon bi-layers have been obtained by low pressure chemical vapor deposition (LPCVD) method at 480 ◦C, by using in-situ nitrogen-doped-...
متن کامل