The pore radius distribution in paper. Part I: The effect of formation and grammage

نویسندگان

  • C.T.J. Dodson
  • A. G. Handley
  • Y. Oba
  • W. W. Sampson
چکیده

The pore radius distribution in paper is known to be influenced by changes in the mean grammage and formation. Experimental data are presented that confirm the established result that the standard deviation of pore radii is proportional to the mean. The data show also that this proportionality is the same for changes in grammage and formation and that, contrary to results reported in the literature, the coefficient of variation of pore radii is approximately constant. This property of the pore radius distribution confirms that the gamma distribution is appropriate for its characterisation. We find that the mean pore radius increases with worsening formation but the effect is weak compared to that of changing grammage. Of the formation indices examined, the mean pore radius is most strongly correlated to a weighted index of floc grammage.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The e ect of paper formation and grammageon its pore size distributionC

The pore size distribution in paper, measured by uid permeation perpendicular to the plane of the sheet, is known to be approximately lognormal with standard deviation proportional to the mean. Also, this corresponds quite well to the polygonal size distribution arising from a random array of lines in a plane, which may be approximated using the negative exponential distribution for inter-cross...

متن کامل

Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys

The formation of microporosity in modified Al-Si alloys has been reviewed in the present study. A major concern in modification is the increased tendency to form microporosity in the macro-shrinkage free Al-Si alloy castings. It has also been demonstrated that at low hydrogen contents (0.1cc/ 100g, Al), where only shrinkage porosity should occur, the effect of Sr-modification on porosity conten...

متن کامل

Study of the Mechanism and Causes of Pore Formation in Sr-modified Al-Si Alloys

The formation of microporosity in modified Al-Si alloys has been reviewed in the present study. A major concern in modification is the increased tendency to form microporosity in the macro-shrinkage free Al-Si alloy castings. It has also been demonstrated that at low hydrogen contents (0.1cc/ 100g, Al), where only shrinkage porosity should occur, the effect of Sr-modification on porosity conten...

متن کامل

Investigation of the Effects of Pressure Path and Tool Parameters in Hydrodynamic Deep Drawing

In recent years, hydroforming process has been applied in different industries such as aerospace, automotive and military industries due to its advantages, such as high dimensional accuracy, capability of forming complicated parts and high drawing ratio. Hydrodynamic deep drawing with radial pressure is one type of hydroforming process. In this paper, forming of cylindrical cups in hydrodynamic...

متن کامل

Synthesis and Experimental-Modelling Evaluation of Nanoparticles Movements by Novel Surfactant on Water Injection: An Approach on Mechanical Formation Damage Control and Pore Size Distribution

Water injection is used as a widespread IOR/EOR method and promising formation damages (especially mechanical ones) is a crucial challenge in the near-wellbore of injection wells. The magnesium oxide (MgO) NanoParticles (NPs) considered in the article underwater flooding experiment tests to monitor the promising mechanical formation damage (size exclusion) in lab mechanistic scale include m...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002