Numerical Modelling for Process Investigation of a Single Coal Particle Combustion and Gasification

Combustion and Gasification are commercial processes of coal utilization, and therefore continuous improvement is needed for these applications. The difference between these processes is the reaction mechanism, in the case of combustion the reaction products are CO2 and H2O, whereas in the case of gasification the products are CO, H2 and CH4. In order to investigate these processes further, a single coal particle model has been developed. The definition of the chemical reactions for each process is key for model development. The developed numerical model simulation uses CFD (Computational Fluid Dynamic) techniques with an Eddy Break Up (EBU) model and a kinetics parameter for controlling the process reaction. The combustion model has been validated and extended to model the gasification process by inclusion of an additional chemical reaction. Finally, it is shown that the single coal particle model could describe single coal particle combustion and gasification. From the result, the difference between single coal particle combustion and gasification can clearly be seen. This simulation model can be considered for further investigation of coal combustion and gasification application processes.