Modeling of Solid Waste Flow and Mixing on the Traveling Grate of a Waste-to- energy Combustion Chamber

نویسندگان

  • MASATO NAKAMURA
  • N. J. THEMELIS
چکیده

Mixing of the highly non-homogeneous municipal solid wastes (MSW) on the traveling grate of mass-burn combustion chambers assists the combustion process in waste-to-energy (WTE) facilities. A matrix-based Markov chain model was developed to simulate particle flow and mixing as the solid waste particles travel over a reverse acting Martin grate. The model was used to project the pathway of a solid waste particle over a time series, in the bottom layer of the bed that is in contact with the bars of the grate. Further analytical and experimental work is planned in order to develop this model to a useful tool for designing future moving grate systems and increasing the combustion efficiency of existing WTEs.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

12th North American Waste to Energy Conference May 17-19, 2004, Savannah, Georgia USA NAWTEC12-2232 Modeling of Solid Waste Flow and Mixing on the Traveling Grate of a Waste-to energy Combustion Chamber

Mixing of the highly non-homogeneous municipal solid wastes (MSW) on the traveling grate of mass-bum combustion chambers assists the combustion process in waste-to-energy (wrE) facilities. A matrix-based Markov chain model was developed to simulate particle flow and mixing as the solid waste particles travel over a reverse acting Martin grate. The model was used to project the pathway of a soli...

متن کامل

Quantitative Analysis of the Flow, Mixing, and Size Segregation Phenomena of Municipal Solid Waste Particles on a Traveling Grate of Waste-to-energy (wte) Combustion Chamber

Flow, mixing, and, size segregation of Municipal Solid Waste (MSW) particles on the traveling grate of a mass-burn waste-to-energy (WTE) combustion chamber is analyzed for understanding those parameters that control the combustion processes and for designing the chamber. In order to quantify these phenomena, a full-scale physical model of the reverse acting grate was built and used for investig...

متن کامل

Numerical analysis of size reduction of municipal solid waste particles on the traveling grate of a waste-to-energy combustion chamber

The size reduction of municipal solid waste (MSW) particles on the reverse acting traveling grate of a waste-to-energy (WTE) combustion chamber was estimated by means of a numerical model combining the particle size distributions (PSD) of MSW and combustion residues and the Shrinking Core Model (SCM). This new integrated model was used to simulate the particle behavior on the grate. During thei...

متن کامل

CFD Modeling of Grate Furnace Designs for Municipal Solid Waste Combustion

The average amount of municipal solid waste (MSW) generated in Malaysia is 0.5–0.8 kg/person/day and has increased to 1.7 kg/person/day in major cities. As rapid development continues, so does the amount of MSW and thus a lack of space for new landfills. Thus a better way of disposing MSW would be to incinerate. The basic design requirements of high-performance incinerators are the 3Ts (time, t...

متن کامل

Reversed Combustion of Waste in a Grate Furnace – an Experimental Study

Most widely used concept for municipal solid waste (MSW) incineration is combustion on a moving grate with energy recovery. In MSW incinerators fresh waste stacked on a grate enters the combustion chamber, heats up by radiation from the flame above the layer and ignition occurs. Ignition front propagates downwards producing heat for drying and devolatilisation of the fresh waste below until it ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2004