FPGA implementation of Induction Motor Vector Control using Xilinx System Generator
نویسندگان
چکیده
Mechatronic systems are complex interdisciplinary products where many parts are present that overlap each other; electronic control board, electromechanical machines, and power drives. With FPGAs, their control can run faster as multiple operations are executed in parallel. A simulation tool that facilitates the direct translation into hardware of mechatronic control algorithms is desirable. The Xilinx System Generator (XSG), a high-level tool for designing high-performance DSP systems under Simulink, has emerged as an excellent tool for such purpose. In this paper such tool is exercised to implement the conventional vector control algorithm for AC drives, which exhibit a good level of complexity. Key-Words: FPGA, System Generator, Induction Motor, Vector Control
منابع مشابه
Hardware Implementation of a Predictive DTC-SVM with a Sliding Mode Observer of an Induction Motor on the FPGA
The first objective of this research is to present an improved Direct Torque Control based on the Space Vector Modulation (DTC-SVM) and a Sliding Mode Observer (SMO). The disadvantages of the conventional Direct Torque Control (DTC) are the high ripples for the electromagnetic torque and the stator flux, as well as the distortions of the stator current. To solve these problems, we have used the...
متن کاملGeneration of Three-Phase PWM Inverter using Xilinx FPGA and its Application for Utility Connected PV System (RESEARCH NOTE)
Analysis and practical implementation of the regular symmetric sampled three-phase PWM inverter waveform has been presented in this paper. It is digitally implemented on a Xilinx field programmable gate array FPGA, and the essential considerations involved in the feasibility of using a Xilinx XC4008E software-based to generate PWM has been discussed. All the necessary Xilinx hardware/software t...
متن کاملSpace Vector Control Scheme of Three Level ZSI Applied to Wind Energy Systems
In this paper the Space Vector Control Scheme is implemented for a Wind Energy System using Three Level Impedance Source Inverter (ZSI). The wind energy system uses a Self Excited Induction generator (SEIG) which is the most emerging application in the field of Wind Energy Conversion System (WECS). The proposed system is modelled with a generator-side Diode Bridge Rectifier and a Stand-Alone si...
متن کاملDesign and Implementation of Direct Torque Control Based on an Intelligent Technique of Induction Motor on FPGA
In this paper the hardware implementation of the direct torque control based on the fuzzy logic technique of induction motor on the Field-Programmable Gate Array (FPGA) is presented. Due to its complexity, the fuzzy logic technique implemented on a digital system like the DSP (Digital Signal Processor) and microcontroller is characterized by a calculating delay. This delay is due to the process...
متن کاملFPGA Implementation Vector Control of Tandem Converter Fed Induction Machine
The paper focuses on the implementation in Field Programmable Gate Arrays (FPGA) of vector control systems of the induction motor supplied from the tandem (hybrid) static-frequency converter. The paper tries to give a synthesis of the tandem vector control structure implementation. The implementation was made using the library elements for rapid prototyping of vector control systems for inducti...
متن کامل