Current Research Status of Corrosion Resistant Coatings
نویسندگان
چکیده
The recent patents on corrosion resistant coatings were reviewed in this paper. The materials of corrosion resistant components, e.g., metals and alloys, ceramics, polymers as well as composite materials, developed for environmental, economic and other concerns were discussed. In addition, the novel methods for forming the coatings, including the powder floating by vibration and the precursor gas, as well as some widely employed methods in the industrial applications were also included to provide useful information for colleagues.
منابع مشابه
Development of Corrosion Resistant Zn-Ni-TiO2 Composite Coatings
The Zn-Ni-TiO2 composite coatings were developed on mild steel by electrodeposition method. The bath constituents (ZnSO4.6H2O, NiSO4.6H2O, TiO2, thiamine hydrochloride) and operating conditions (temperature and pH) were optimized by Hull cell method, for peak performance of the coating against corrosion. The coatings were prepare...
متن کاملCORROSION RESISTANT SOL–GEL COATING ON 2024-T3 ALUMINUM
The inherent reactivity of the Al–Cu alloys is such that their use for structural, marine, and aerospace components and structures would not be possible without prior application of a corrosion resistance system. Historically these corrosion resistance coatings were based on the use of chemicals containing Cr (VI) compounds. Silane coatings are of increasing interest in industry due to th...
متن کاملEffect of Gas Ratio on Tribological and Corrosion Properties of Ion Beam Sputter Deposited TiN Coatings
Titanium nitride thin films were grown on 304 stainless steel substrates at various nitrogen/argon flow ratios by ion beam sputtering (IBS) technique. The current research is a follow up study on the influence of gas ratio on structural and corrosion properties in the TiN coated 304 stainless steel. Film structural identification of phases was performed using X-ray diffractometry (XRD). Sca...
متن کاملEFFECT OF CURRENT DENSITY ON MICROSTRUCTURE AND CORROSION BEHAVIOR OF PURE COBALT COATINGS OBTAINED
Pure cobalt coatings were electrodeposited on copper substrate by means of direct electric current in a chloride solution at different current densities in the range of 10-70 mA cm -2 . The surface morphology and microstructure were investigated via X-ray diffraction analysis and scanning electron microscopy. Corrosion behavior of cobalt coatings was also studied in a 3.5 wt% NaCl soluti...
متن کاملAn Updated Review of the Fatigue Behavior of Components Coated with Thin Hard Corrosion-Resistant Coatings
In the present manuscript, an extended review on the state of the art on the experimental and numerical characterization of the fatigue behavior of Physically Vapor Deposited (PVD) and Chemically Vapor Deposited (CVD) thin hard coatings is presented. The current application and development fields of PVD and CVD treatments are analysed, focusing on the advantages granted by the adoption of these...
متن کامل