Bending Moment Calculations for Piles Based on the Finite Element Method
نویسندگان
چکیده
andApplied Analysis Hindawi Publishing Corporationhttp://www.hindawi.comVolume 2013 ISRNAppliedMathematics Hindawi Publishing Corporationhttp://www.hindawi.comVolume 2013Hindawi Publishing Corporationhttp://www.hindawi.comVolume 2013International Journal ofCombinatorics Hindawi Publishing Corporationhttp://www.hindawi.comVolume 2013Journal of Function Spacesand Applications InternationalJournal ofMathematics andMathematicalSciences Hindawi Publishing Corporationhttp://www.hindawi.comVolume 2013
منابع مشابه
Numeric Simulation of Moment of Stabilizing Pile under the Local Liquefaction Based on Finite Element Method
The evaluation of liquefaction effect on the dynamic moment of stabilizing piles is potentially significant. Based on the dynamic centrifuge modeling of a slope reinforced with a row of copper model pile, this paper not only analyzed the response of dynamic pore pressure, earthquake deformation and macroscopic phenomenon measured in the response of the reinforced slope, but also simulated the r...
متن کاملLoading Estimation of Flapping Wings under Aeroelastic Effect Using Finite Element Method
The aim of this paper is to provide an aeroelastic computational tool which determines the induced wing loads during flapping flight. For this purpose, a Finite Element (FE) code based on a four-node plate bending element formulation is developed to simulate the aeroelastic behavior of flapping wings in low incompressible flow. A quasi-steady aerodynamic model is incorporated into the aeroelast...
متن کاملNumerical investigation on the optimal location of floating piles in slope under seismic
Location of floating piles is one of the main factors influencing on their optimal performance with respect to slope stability improvement. Many studies have been devoted to this concern using different analytical methods. Due to the importance of this issue in seismic conditions, still more studies are necessary and therefore, the location of floating piles has been investigated in this resear...
متن کاملAnalysis of non-connected piled raft foundations (NCPRF) with cushion by finite element method
For the optimum design of Piled Raft Foundations (PRF), the concept of settlement reducer piles has been applied. However, when these piles are connected to the raft, a high stress may develop in the relatively small number of piles. Therefore, an alternative approach is to disconnect the piles from the raft forming a new system called a non-connected or disconnected piled-raft foundation (NCPR...
متن کاملUsing the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence
An elastic finite element analysis was conducted to evaluate the stress distribution in the initiation zone of the adhesive rupture during the 3-point bending test. This test is used to measure the adherence between a polyepoxy adhesive and aluminum alloy with different surface treatments. The purpose is to compare, in the high stress concentration areas, the stress fields calculated using fini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- J. Applied Mathematics
دوره 2013 شماره
صفحات -
تاریخ انتشار 2013